本文選題：CNAS-CL + 應用說明�。� 參考：《中國計量》2017年04期

【摘要】：正檢測和校準的方法是實驗室實施檢測和校準工作的重要依據,也是保證檢測和校準結果準確性的關鍵控制要素之一。CNASCL01:2006《檢測和校準實驗室能力認可準則》(以下簡稱《認可準則》)對此要素提出了諸多要求,同時在其應用說明等文件上進一步細化,便于實驗室操作。本文主要從標準方法和非標準方法、方法的
[Abstract]:The method of testing and calibration is an important basis for the laboratory to carry out the work of testing and calibration. It is also one of the key control elements to ensure the accuracy of the test and calibration results. CNASCL01: 2006 "Test and Calibration Laboratory competence Accreditation Standard" (hereinafter referred to as the "Accreditation Standard") has put forward many requirements for this element. At the same time in its application instructions and other documents further refinement, easy to operate in the laboratory. This article mainly from the standard method and the nonstandard method, the method
【作者單位】： 浙江省計量科學研究院;
【分類號】：F203

【相似文獻】

相關期刊論文 前1條

1 陳延青;;對CNAS-CL01中標準物質期間核查的理解[J];現代測量與實驗室管理;2009年03期

，

本文編號：1903042