【摘要】：結合某型粘滯阻尼器,通過流體動力學分析軟件Fluent對粘滯阻尼器模型進行了仿真分析�？紤]使用中阻尼器硅油黏度隨溫度變化及活塞自重引起的應力變形等實際情況,對模型和仿真進行了調整和修正,最終達到了仿真和試驗結果誤差在5%以內的較高精度要求。研究了活塞長度和間隙等關鍵參數對間隙式粘滯阻尼器性能的影響,尤其是對速度指數和阻尼系數的影響規律。
[Abstract]:The model of viscous damper is simulated by the fluid dynamics analysis software Fluent. Considering the fact that the viscosity of silicone oil in medium dampers varies with temperature and the stress and deformation caused by piston weight, the model and simulation are adjusted and corrected, and the accuracy of simulation and test results is higher than 5%. The influence of the key parameters such as piston length and clearance on the performance of the clearance viscous damper, especially on the velocity exponent and damping coefficient, is studied.
【作者單位】： 河北工業大學機械工程學院;河北寶力工程裝備股份有限公司;
【分類號】：TU352.1

【相似文獻】

相關期刊論文 前10條

1 馬良U，

本文編號：2161236