發布時間：2018-05-09 10:23

  本文選題：百萬千瓦火電機組 + DCS項目�。� 參考：《華東理工大學》2015年碩士論文

【摘要】：火力發電是我國工業生產自動化水平最先進、普及的領域之一,DCS(集散式控制系統)在火電廠控制系統中已經被廣泛應用,DCS的安全性、可靠性、經濟性方面得到充分肯定。隨著我國資源日益短缺,以及節能減排的壓力日益加大,煤炭利用率高、排放水平低的百萬千瓦超超臨界火電機組將成為今后我國能源建設的主力軍。百萬千瓦火電機組DCS項目具有涉及面較廣,接口復雜,資源配置要求高等特點,尤其在其建造階段,涉及設計、制造、安裝、調試等多個關鍵階段,因此對DCS供應商的項目管理水平提出了更高的要求。 本文首先從建立DCS項目流程體系出發,并以項目進度管理基本理論和相關知識為基礎,結合江蘇JR發電廠2×1000MW超超臨界燃煤機組DCS項目的具體工程,闡述了項目進度計劃與控制的原理,分析了國內、外目前在DCS項目進度管理的現狀以及研究狀況,探討了影響火電DCS項目進度的因素,并基于項目進度管理的理念以及百萬千瓦火電機組DCS項目的特點,提出了大型火電DCS項目應采用的進度管理方法和技術。期待本文對大型火電DCS項目的進度計劃與控制方面具有一定的借鑒意義和推廣作用。
[Abstract]:Thermal power generation is one of the most advanced and popular fields of industrial production automation in our country. DCS (distributed Control system) has been widely used in the control system of thermal power plant. The security, reliability and economy of DCS have been fully affirmed. With the increasingly shortage of resources and the increasing pressure of energy saving and emission reduction, millions of kilowatt ultra-supercritical thermal power units with high coal utilization and low emission level will become the main force of energy construction in China in the future. The DCS project of millions of kilowatt thermal power units has the characteristics of wide coverage, complex interface, high resource allocation and so on, especially in its construction phase, involving many key stages such as design, manufacture, installation, commissioning, etc. Therefore, the DCS supplier project management level put forward a higher request. Based on the basic theory of project schedule management and related knowledge, this paper starts from the establishment of DCS project flow system, and combines the concrete project of DCS project of 2 脳 1000MW ultra supercritical coal-fired unit in JR Power Plant in Jiangsu Province. This paper expounds the principle of project schedule planning and control, analyzes the present situation and research status of DCS project schedule management in China and abroad, and probes into the factors influencing the progress of thermal power DCS project. Based on the idea of project schedule management and the characteristics of DCS project for millions of kilowatts thermal power unit, this paper puts forward the schedule management method and technology that should be adopted in large scale thermal power DCS project. It is expected that this paper can be used for reference and popularized in the progress planning and control of large scale thermal power DCS projects.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU722;TM621

【參考文獻】

相關期刊論文 前10條

1 高俊濤;張莉;;基于過程建模的項目進度計劃方法[J];北京航空航天大學學報;2007年09期

2 劉耕,王學軍;國內外項目進度管理的比較及建議[J];重慶交通學院學報;2003年S1期

3 王緯;ISO/IEC12207《信息技術——軟件生存期過程簡介》[J];信息技術與標準化;2002年03期

4 盧少文;;計算機信息系統集成項目的進度計劃技術研究[J];福建電腦;2008年10期

5 馮遠堅;劉暉;;淺談IT項目管理中控制進度的方法[J];廣西科學院學報;2012年01期

6 張永建;;大型煉化項目進度計劃與控制研究[J];中國石油和化工標準與質量;2012年03期

7 唐守輝;李立政;姜衛東;;中國現代項目管理[J];黑龍江科技信息;2008年27期

8 楊莉;李南;;軟件項目進度的關鍵鏈管理[J];計算機工程;2010年07期

9 郭波;高潔;;新建變電站項目進度管理及應用研究[J];技術與創新管理;2013年01期

10 駱意;舊機組實施DCS改造工程管理方法的探討[J];華北電力技術;2001年12期

，

本文編號：1865658