本文關鍵詞：基于物聯網的Z企業精益生產物流研究　出處：《北京物資學院》2017年碩士論文　論文類型：學位論文

  更多相關文章： 生產物流 精益物流 物聯網 物流流程

【摘要】：電冰箱生產車間作為電冰箱整個價值鏈至關重要的一環,生產物流系統運作效率又對電冰箱生產車間的作業效率具有至關重要的影響。因此,首先本文從案例Z企業生產物流系統生產效率低下和生產成本過高的實際問題出發,分析了Z企業生產模式和布局混亂,在制品庫存過高,信息系統效率低下等核心問題。針對上述問題的優化分別采用了精益物流思想,物聯網技術,TOC約束理論等理論與技術整合企業資源,平衡生產節拍,實現了企業智能化生產,增強了企業核心競爭力。然后,圍繞Z企業生產物流中的核心問題,論文從生產布局、生產節拍、物流信息化建設和系統評價四個方面進行了深入研究,重點研究?jī)?nèi)容如下:1.針對Z企業測試車間生產線布局混亂問題,提出了基于P-中值模型進行測試車間布局優化的方法。論文首先結合測試設備的特殊性,在測試車間為2臺測試設備選擇了8個候選位置點,目標是從8個位置中選擇2個位置,使得各生產線到這兩個位置總距離最短,從而選定設備安裝位置,實現布局優化。2.針對Z企業在制品線邊堆積嚴重問題,論文提出通過利用TOC約束理論進行生產節拍平衡方法減少在制品庫存。論文首先分析了優化前各個工序的生產節拍時間,然后將問題轉化為節拍時間方差最小問題,進而通過打破生產瓶頸工序的方法,實現了生產節拍的均衡化。3.針對Z企業物流系統效率低問題,論文通過嵌入物聯網技術,簡化了原材料及成品的出入庫流程,增強了對于生產作業的監控力度,打通了數據傳輸?shù)母鱾�(gè)節點;進而從物聯網基礎設施搭建的角度,測試了物聯網技術應用的可行性,最終優化了生產物流流程,實現了生產車間的信息化建設。4.針對流程優化方案有效性問題,論文提出通過關聯矩陣法評價優化后的生產物流系統。根據系統的特征,運用關聯矩陣法在各指標數據的基礎上對Z企業優化前后的生產物流系統進行績效評價,驗證了系統的有效性。最后,論文從研究?jī)?nèi)容和不足之處角度,對論文進行了總結并指出了論文進一步研究的方向。
[Abstract]:Refrigerator production workshop as a part of the whole value chain of the refrigerator is crucial, has important influence on the operation efficiency of refrigerator production workshop production logistics system operation efficiency. Therefore, this paper starting from the production logistics system of Z company case of low production efficiency and high cost of production problems, analysis of the Z production mode and layout WIP, inventory is too high, the low efficiency of information systems and other core issues. The optimization to solve the above problems using the idea of lean logistics, networking technology, integration of enterprise resources constraint theory TOC theory and technology, balance the production cycle, to achieve the enterprise intelligent production, enhance the core competitiveness of enterprises. Then, around the core problem of production logistics in Z enterprise, the production layout, production cycle, logistics informatization construction and evaluation system of the four aspects of the deep In the study, the key research contents are as follows: 1. for the Z test workshop production line layout problems and test methods of optimization of workshop layout is presented based on P- value model. Firstly, combined with the special testing equipment, testing workshop for 2 sets of test equipment selection of 8 candidate points, the goal is to select 2 from the position of 8 positions in the production line to the two position in the shortest distance, so as to select the installation location, to achieve the layout optimization of.2. line for WIP Z enterprise at the accumulation of serious problems, this paper through the use of the TOC theory method of balanced beat production to reduce WIP inventory. It firstly analyzes the optimization of each the process of production cycle time, and then the problem is transformed into the problem of minimum time variance, and then through the method of breaking the production bottleneck, realize the equalization of.3 production cycle The Z enterprise logistics system efficiency is low, the embedded networking technology, simplifies the raw materials and finished products in process, to strengthen the supervision of production and operation, through each node data transmission; then from the network infrastructure building angle, the feasibility of the application of Internet technology test to optimize the production logistics process, the production workshop of.4. information construction for process optimization scheme is effective, the paper presents the production logistics system optimization evaluation of correlation matrix method. After according to the system characteristics, using correlation matrix method based on the data on the production logistics system for enterprises to optimize the performance before and after Z to evaluate and verify the effectiveness of the system. Finally, the paper from the research content and the inadequacies of angle, summarizes the thesis and points out the further research The direction.

【學位授予單位】：北京物資學院
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F426.6;F252;TP391.44;TN929.5

【相似文獻】

相關期刊論文 前10條

1 吳雪霽;;把握“物聯網”時代的三個關鍵點[J];通信世界;2009年33期

2 秦茜;;物聯網驟成產業巨浪 各方大肆追捧恐為時尚早[J];IT時代周刊;2009年Z2期

3 石菲;;物聯網還有多遠[J];中國計算機用戶;2009年Z2期

4 馬繼華;韓文哲;;物聯網的未來會變成“空中樓閣”嗎?[J];信息網絡;2009年10期

5 ;物聯網系列報道之一 理性物聯網[J];通信世界;2009年40期

6 李鵬;;物聯網發展 標準與應用先行[J];通信世界;2009年40期

7 李鵬;趙經緯;;北郵謝東亮 物聯網需兩顆紅心一種準備[J];通信世界;2009年40期

8 周雙陽;;尋找物聯網的制高點[J];通信世界;2009年41期

9 張鵬;;物聯網,十年涅i，

本文編號：1375073