【摘要】：我國煙草行業正處于快速發展中,而煙草物流是煙草行業的核心業務,實現煙草物流的“不可替代性”既是“卷煙上水平”的需要,也是保證行業持續健康發展的需要,但目前煙草物流方面還存在著較多的問題需要我們進一步研究。 本文依托煙草企業配送中心實際項目,以實用性、系統柔性、可靠性、示范性和可拓展性為原則,以系統仿真為設計保障,對煙草企業提供的基礎資料進行系統的研究,并對企業現實中的具體需求進行了詳細的分析,通過對業務數據的處理、業務流程的歸納總結,根據煙草物流行業的最新技術發展和以往的施工經驗,制定出具體的設計需求、工藝流程和物流量分析結果。再通過對各個區域及整體的作業能力和效率計算,依據核心設計理念,得出了配送中心的總體規劃設計方案以及區域規劃設計方案。 本文的主要內容如下： 1、詳細分析了國內外在配送中心和系統仿真方面的發展研究現狀,對煙草行業背景進行了較為深入的調查。發現現在的煙草配送中心缺乏完整的理論體系,在配送中心的整體規劃方面的研究還是有欠缺的。 2、根據配送中心提供的基礎資料,提出了配送中心的整體設計需求,通過詳細的研究與計算,分析設計出了滿足企業要求的配送中心總體規劃設計方案。 3、對配送中心內部倉儲區域設計方案進行了詳細的闡述,分析了區域內部的動線情況和人員具體配置情況。 4、對配送中心內部備貨及分揀區域的兩套設計方案進行了詳細描述和對比,得出了更優方案,給出了區域內部的流程、動線、分揀線路、人員配置等情況。 5、使用Tecnomatix Plant Simulation9物流系統仿真軟件對規劃方案進行系統建模,通過仿真運行及結果分析,對規劃設計方案進行了進一步的驗證,得到了肯定的結果。
[Abstract]:The tobacco industry in China is developing rapidly, and the tobacco logistics is the core business of the tobacco industry. To realize the "irreplaceable" of the tobacco logistics is not only the need of "the level of cigarette", but also the need to ensure the sustainable and healthy development of the industry. However, there are still many problems in tobacco logistics that need further study. Based on the actual project of the distribution center of tobacco enterprises, this paper studies the basic data provided by tobacco enterprises based on the principles of practicability, system flexibility, reliability, demonstration and expansibility, and system simulation as the design guarantee. Through the processing of the business data, the summary of the business process, according to the latest technological development of the tobacco logistics industry and previous construction experience, the specific design requirements are worked out. Process flow and material flow analysis results. According to the core design concept, the overall planning and design scheme of the distribution center and the regional planning and design scheme are obtained by calculating the operation ability and efficiency of each region and the whole area. The main contents of this paper are as follows: 1. The research status of distribution center and system simulation at home and abroad is analyzed in detail, and the background of tobacco industry is investigated deeply. It is found that the present tobacco distribution center lacks a complete theoretical system, and the research on the overall planning of the distribution center is still lacking. 2. According to the basic data provided by the distribution center, the overall design requirement of the distribution center is put forward. Through detailed research and calculation, the overall planning and design scheme of the distribution center which meets the requirements of the enterprise is analyzed and designed. 3. The design scheme of warehouse area in distribution center is described in detail, and the situation of dynamic line and the concrete disposition of personnel are analyzed. 4. The paper describes and compares the two sets of design schemes of the internal stocking and sorting area of the distribution center in detail, obtains a better scheme, and gives the flow, moving line, sorting line, personnel configuration and so on in the distribution center. 5. The Tecnomatix Plant Simulation9 logistics system simulation software is used to model the planning scheme. Through the simulation operation and the analysis of the results, the planning and design scheme is further verified, and the positive results are obtained.
【學位授予單位】：北京郵電大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F426.89;F259.2;F224

【參考文獻】

相關期刊論文 前10條

1 馬士華,文堅;基于時間延遲的訂單分批策略研究[J];工業工程與管理;2004年06期

2 賴明勇;肖偉;張漢江;黃恒偉;;高層貨架貨格數目整數規劃模型[J];湖南大學學報(自然科學版);2006年04期

3 田偉,田國會,張攀,李曉磊;應用改進LK算法求解固定貨架揀選優化問題[J];計算機應用;2004年06期

4 田國會,張攀,尹建芹,路飛,宋孔杰;基于混合遺傳算法的固定貨架揀選優化問題研究[J];機械工程學報;2004年02期

5 楊華,李欣,鐘敏;自動化立體倉庫堆垛機揀選作業調度研究[J];起重運輸機械;2005年03期

6 寧春林,田國會,尹建芹,路飛;Max-Min蟻群算法在固定貨架揀選路徑優化中的應用[J];山東大學學報(工學版);2003年06期

7 張貽弓;吳耀華;;可合流的自動分揀系統訂單排序優化[J];山東大學學報(工學版);2008年05期

8 李詩珍,王轉;配送中心揀貨系統中的分區策略研究[J];物流技術;2002年02期

9 李詩珍,王 轉,張克誠;配送中心揀貨作業中的訂單分批策略研究[J];物流技術;2002年04期

10 關宏,苑韜,熊捷;立體倉庫規劃設計方法研究[J];物流技術;2004年05期

，

本文編號：2382317