本文關鍵詞： 工程機械 再制造 系統動力學 決策系統　出處：《廣西大學》2013年碩士論文　論文類型：學位論文

【摘要】：現代經濟生活在滿足人們對各類工業產品越來越高需求的同時,也產生了資源浪費、能源短缺等諸多環境能源問題,改變生活、生產方式成為其解決之道,再制造這種新型生產方式就屬于其中之一,并受到全社會的關注。而伴隨著再制造的發展,舊件回收、再制造加工和銷售的不確定性對再制造的決策管理造成了困難。本文具體針對某工程機械再制造企業遇到的問題,運用系統動力學仿真方法,建立工程機械再制造供應鏈決策支持系統,為管理者選擇合理有效的決策方案提供分析工具。本文主要研究內容如下： 第一步進行系統分析。首先,研究工程機械再制造過程中存在的問題,并對本文決策系統的業務需求和所需研究方法進行簡要分析。其次,對再制造供應鏈的網絡和業務流程進行總體分析,并詳細地分析了本文決策系統的功能結構。另外,著重研究了系統中各模塊的數據流程,并進行功能分析和繪制數據流程圖。這一步主要為系統設計提供數據分析基礎。 第二步進行系統仿真模型設計。建立了工程機械再制造供應鏈決策系統的仿真模型,并完成模型中參數和數學方程式的設置。通過仿真分析檢驗模型的有效性,以及實現了對再制造處理過程的仿真。最后,將其模型內部仿真運算過程用于指導本文決策系統算法程序的設計。 第三步完成系統的設計及開發。首先,完成了決策系統的總體架構設計、數據庫配置和數據表設計,并對查詢、系統動力學仿真算法、量本利分析和決策樹分析這四項方法的程序進行詳細設計。然后,基于功能結構的設計,利用.NET開發框架完成了系統架構的搭建及功能界面的設計,并通過系統評估檢驗了該平臺的有效性。
[Abstract]:Modern economic life not only meets the increasing demand for various industrial products, but also produces a lot of environmental energy problems, such as waste of resources, energy shortage and so on. This new mode of production of remanufacturing is one of them, and has attracted the attention of the whole society. With the development of remanufacturing, old parts are recycled. The uncertainty of remanufacturing processing and sales makes the decision management of remanufacturing difficult. In this paper, aiming at the problems encountered by a remanufacturing enterprise of construction machinery, the simulation method of system dynamics is used. A decision support system for remanufacturing supply chain of construction machinery is established to provide analysis tools for managers to choose reasonable and effective decision plans. The main contents of this paper are as follows:. The first step is system analysis. Firstly, the problems existing in the remanufacturing process of construction machinery are studied, and the business requirements and necessary research methods of the decision-making system are briefly analyzed. The network and business process of the remanufacturing supply chain are analyzed in general, and the function structure of the decision system is analyzed in detail. In addition, the data flow of each module in the system is studied emphatically. Function analysis and data flow chart are carried out. This step provides data analysis basis for system design. In the second step, the system simulation model is designed. The simulation model of the supply chain decision system for remanufacturing of construction machinery is established, and the parameters and mathematical equations in the model are set up. The validity of the model is verified by simulation analysis. Finally, the internal simulation process of the model is used to guide the design of the algorithm program of the decision system in this paper. The third step is to complete the design and development of the system. Firstly, the overall architecture design, database configuration and data table design of the decision-making system are completed. Then, based on the design of functional structure, using .NET development framework to complete the system architecture and functional interface design, the four methods of quantitative cost-benefit analysis and decision tree analysis are designed in detail. The effectiveness of the platform is verified by systematic evaluation.
【學位授予單位】：廣西大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：N941.3;F274;F426.4

【參考文獻】

相關期刊論文 前10條

1 邊永智;量本利分析的數學模型[J];安陽師范學院學報;2005年05期

2 陳國棟;基于視景仿真技術的防洪減災決策支持系統的研究[J];福建電腦;2003年11期

3 徐濱士;;工程機械再制造及其關鍵技術[J];工程機械;2009年08期

4 陳林,張燕彬,李磊;風險型量本利分析在生產經營中的應用[J];哈爾濱理工大學學報;2000年06期

5 甄晶博;唐晶磊;霍英秋;;陜西蘋果小卷葉蛾蟲害疫情監測決策支持系統研究[J];農機化研究;2013年05期

6 魏志勇;;探究森林防火輔助決策支持系統的設計與實現[J];黑龍江科技信息;2013年06期

7 寧偉;王傳會;;基于灰色系統理論的GDP回歸分析[J];泰安教育學院學報岱宗學刊;2009年04期

8 李惠強;柯華虎;尹秀琴;翟全禮;;基于系統動力學的企業資金管理決策仿真研究[J];華中科技大學學報(城市科學版);2009年01期

9 馬亞龍,王精業,徐丙立,劉永紅;基于分布式交互作戰仿真的智能決策支持系統分析[J];系統仿真學報;2002年04期

10 游金松;鐘駿杰;范世東;姚玉南;;產品再制造逆向物流管理策略研究[J];現代制造工程;2007年01期

，

本文編號：1548084