本文關鍵詞： 中控系統 項目管理 質量 質量管理 信息平臺　出處：《電子科技大學》2013年碩士論文　論文類型：學位論文

【摘要】：中控系統作為制絲生產過程的核心系統,負責制絲車間的生產控制任務,并對煙葉制絲過程中的設備運行、工藝質量情況進行監控,以保證工藝質量和正常生產。由于中控系統存在著自身的局限性,操作系統和軟件系統的不穩定性和可靠性差的問題,直接導致制絲過程中出現嚴重的批間質量差異,特別是感官質量的差異。雖然制絲過程中水分、溫度、加香加料量、填充值等各項物理指標均達標,但成品煙支感官質量卻存在明顯差異。同一品牌不同時期生產的成品煙支感官質量也都有比較明顯的差異。本文針對上述問題,分析中控項目的特點,運用項目質量管理的理論與方法,對中控項目進行質量管理。搭建中控系統信息平臺,配置高效的自動化管控系統,加快生產信息化,增加和完善中控系統工藝標準、牌號生產配方管理功能。完善工藝參數、將有效參數和經驗參數進行對比,消除干擾因素,降低故障停機率,減少批間質量差異。為后續進行的中控系統技術改造和項目質量管理提供參考,為提高卷煙品質提供了有力的支撐,具有一定的理論研究價值與現實的應用前景。
[Abstract]:As the core system of the silk production process, the central control system takes responsibility for the production control task of the silk making workshop, and monitors the operation and process quality of the equipment in the process of tobacco production. In order to ensure process quality and normal production. Due to the limitations of the central control system, operating system and software system instability and poor reliability. This directly leads to serious quality differences between batches, especially the sensory quality, although the physical indexes such as moisture, temperature, flavoring amount, filling value and so on are up to standard. However, there are obvious differences in sensory quality of finished tobacco. The sensory quality of finished tobacco produced in different periods of the same brand also has obvious differences. In view of the above problems, this paper analyzes the characteristics of the central control project. Using the theory and method of project quality management, this paper carries on the quality management to the central control project, sets up the information platform of the central control system, configures the efficient automation control system, speeds up the production information. Increase and improve the process standard of the central control system, brand production formula management function. Perfect the process parameters, compare the effective parameters with the experience parameters, eliminate the interference factors and reduce the failure rate. To reduce the quality difference between batches, to provide a reference for the subsequent technical transformation of the central control system and project quality management, and to provide a strong support for the improvement of cigarette quality. It has certain theoretical research value and practical application prospect.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F273.2;F426.8

【相似文獻】

相關期刊論文 前10條

1 宋岐國;陳U，

本文編號：1468149