本文選題：供應商質量管理 + 關鍵質量特性��； 參考：《華南理工大學》2014年碩士論文

【摘要】：近年隨著機械硬盤(HDD)的需求在2010年達到頂峰后呈現出負增長,而且固態硬盤技術(SSD)的逐漸成熟更是瓜分了機械硬盤業務部分市場份額,對機械硬盤行業造成了很大的沖擊。如何不斷地研究改進管理方式、縮減成本、提高產品質量、縮短新產品周期、提高客戶的滿意度和忠誠度也就成為公司保持一定的競爭優勢并且不斷提高公司收益的關鍵所在。為滿足新形勢下客戶不斷變化的,高精度、高質量的需求,企業紛紛把供應商質量管理作為其核心戰略,拋棄傳統的基于企業本身的質量管理思想,把企業內部以及外部之間質量形成過程當成整體過程進行質量控制和管理。 目前國內外已有許多質量管理的研究成果,主要集中在企業內部的質量控制和質量保證,庫存管理,供應商的評價和選擇等,本文針對S公司對彈性臂現行免檢入庫的瓶頸—就是彈性臂關鍵質量特性(CTQ)精度要求高但與彈性臂供應商測試機相關性偏倚波動大容易引起供應商生產的質量特性中心值偏移目標值,本文運用六西格瑪DMAIC改進流程找出影響彈性臂質量特性測試波動的主要關鍵要素,通過穩定測試相關性的改善和建立標準樣本監控測試機制度,把現行事后處理問題的免檢入庫制度流程在測量系統穩定性的基礎上提出基于標準樣本實時監控的事前免檢入庫流程,有效地減少因?yàn)楣⿷?yīng)商測量系統不穩定造成不良批次流入S公司生產線,避免質量問題造成的不良分析以及返工、退貨等引起質量成本增加和產品周期延長等不可估量的質量損失和市場損失。
[Abstract]:In recent years, with the demand of HDD has reached its peak in 2010, and the technology of solid state hard disk (SSDs) has matured gradually, it has divided the market share of mechanical hard disk business, which has caused a great impact on the mechanical hard disk industry. How to continuously study how to improve the management mode, reduce the cost, improve the product quality, shorten the new product cycle, improve customer satisfaction and loyalty also become the key to keep a certain competitive advantage and constantly improve the company's income. In order to meet the ever-changing, high precision and high quality demands of customers under the new situation, enterprises take supplier quality management as their core strategy one after another, and abandon the traditional quality management thought based on the enterprise itself. Take the process of quality formation within and outside the enterprise as an integral process for quality control and management. At present, there are many research achievements in quality management at home and abroad, mainly focusing on the internal quality control and quality assurance, inventory management, evaluation and selection of suppliers, etc. This paper aims at the bottleneck of S company to the flexible arm which is the key quality characteristic of the elastic arm, which is the key quality characteristic of the elastic arm. But the fluctuation of the bias associated with the supplier testing machine of the elastic arm can easily lead to the special quality of the supplier. Property center value offset target value, In this paper, we use the six Sigma DMAIC improvement process to find out the main key factors that affect the fluctuation of the elastic arm mass characteristic test, and establish the standard sample monitoring and testing machine system by improving the stability of the test correlation and establishing the standard sample monitoring and testing machine system. Based on the stability of the measurement system, this paper puts forward the pre-inspection and warehousing exemption flow based on the real-time monitoring of standard samples. Effectively reduce the flow of bad batches into S production line due to the instability of supplier measurement system, avoid bad analysis and rework caused by quality problems, Return of goods such as increased quality costs and product cycle extension such as incalculable quality loss and market losses.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F273.2;F416.6

【參考文獻】

相關期刊論文 前10條

1 何瓊,劉宇;基于質量的供應鏈管理[J];北京機械工業學院學報;2004年01期

2 徐曉芳,張偉,葉春明;基于供應鏈的企業質量管理[J];工業工程;2002年05期

3 文昌俊;基于供應鏈管理的質量管理方法研究[J];湖北工學院學報;2004年03期

4 唐曉青,麻書城;供應鏈質量預測方法[J];航空制造技術;2002年07期

5 呂慶領,唐曉青;基于Intranet/Extranet/Internet的企業質量管理信息系統[J];計算機集成制造系統-CIMS;2002年09期

6 張根保;任顯林;劉立X;葛紅玉;;面向制造過程的產品多關鍵質量特性優化模型[J];計算機集成制造系統;2010年06期

7 祝雅輝;;供應鏈管理的研究現狀及發展方向[J];昆明大學學報;2008年03期

8 劉微,王耀球;供應鏈環境下的質量鏈管理[J];物流技術;2005年06期

9 吳綺,許統邦;供應鏈質量管理——21世紀質量管理新思路[J];中國質量;2001年12期

10 王磊;郭偉;;協同供應鏈質量系統集成評價方法研究[J];組合機床與自動化加工技術;2007年01期

，

本文編號：2034156