【摘要】：薄板結構中,傳統大塊敷設阻尼雖然能提高隔聲量,但不利于輕量化設計,因此提出二維周期阻尼敷設方式,借助有限元法及VA one聲學仿真軟件,分析二維周期塊狀阻尼分布、形狀等參數對薄板隔聲特性的影響。結果表明,隨著阻尼數目的增加,在16~125Hz和250~1 000 Hz頻段內,6塊阻尼敷設方式隔聲量最小;全頻段范圍內,x、y方向晶格常數均為100mm時,隔聲量最小。因此,在特定頻段內,合理調整周期阻尼結構的晶格常數及阻尼數目能使隔聲量達到最大;二維周期阻尼形狀對隔聲量有較大的影響,對于圓、正三角形及矩形三種特定的阻尼形狀而言,圓形阻尼形狀隔聲效果最優。
[Abstract]:In thin plate structure, although the traditional large block laying damping can improve the sound insulation, but it is not conducive to lightweight design, so the two-dimensional periodic damping laying mode is put forward, and the two-dimensional periodic block damping distribution is analyzed with the help of finite element method and VA one acoustic simulation software. The influence of shape and other parameters on the sound insulation characteristics of thin plates. The results show that with the increase of damping number, the sound insulation of six damping laying modes is the smallest in the frequency range of 16~125Hz and 250 鈮，

本文編號：2491279