【摘要】：隨著水聲技術和電子技術的不斷發展,數據存儲系統在水聲技術研究和水聲設備研制中發揮著越來越重要的作用,而水聲設備的不斷推陳出新也對存儲介質的體積、容量和數據存儲速度以及存儲系統本身的實用性、穩定性和成本控制等方面提出了更高的要求。本論文設計了矢量陣目標探測系統的數據存儲分機,目標是實現網絡數據的收發與數據的本地存儲。本設計使用MityARM-1808作為核心板,構建嵌入式Linux操作系統,使用USB2.0轉千兆網絡適配器實現網絡數據的收發并實現數據在SATA硬盤上的存儲。本論文完成了矢量陣目標探測系統數據存儲分機的設計與調試,首先根據系統需求設計并完成了以MityARM-1808為核心的數據存儲分機硬件電路,包括原理圖設計與PCB制作。硬件電路包括核心板外圍接口電路、網絡通信模塊、串口模塊、SATA硬盤存儲模塊、SD卡存儲模塊及電源模塊。隨后對各個硬件模塊進行了調試,并編寫了網絡數據收發和SATA硬盤存儲程序,實現了對通過TCP網絡數據的接收和轉發與硬盤存儲。最后對本設計進行了性能測試與驗證,包括網絡傳輸性能與硬盤存儲性能,證明了本設計的可行性與合理性。
[Abstract]:With the continuous development of underwater acoustic technology and electronic technology, the data storage system plays a more and more important role in the research of underwater acoustic technology and the development of underwater acoustic equipment, and the continuous development of underwater acoustic equipment also plays an important role in the volume of storage medium. Higher requirements for capacity and speed of data storage, practicability, stability and cost control of the storage system itself are put forward. In this paper, the data storage extension of vector array target detection system is designed. The goal is to realize the receiving and receiving of network data and the local storage of data. This design uses MityARM-1808 as the core board, constructs the embedded Linux operating system, uses the USB2.0 to gigabit network adapter to realize the receiving and receiving of the network data and realizes the storage of the data on the SATA hard disk. This paper completes the design and debugging of the data storage extension of the vector array target detection system. Firstly, according to the system requirements, the hardware circuit of the data storage extension based on MityARM-1808 is designed and completed, including schematic design and PCB making. The hardware circuit includes core board peripheral interface circuit, network communication module, serial port module, SATA hard disk storage module, SD card memory module and power supply module. Then each hardware module is debugged, and the network data receiving and transmitting and SATA hard disk storage program are written, and the receiving and forwarding of the network data through TCP and the hard disk storage are realized. Finally, the performance of the design is tested and verified, including network transmission performance and hard disk storage performance, which proves the feasibility and rationality of the design.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB565

【參考文獻】

相關期刊論文 前3條

1 吳芝路;馮陽凱;任廣輝;;基于SATA接口硬盤數據存儲系統設計[J];哈爾濱商業大學學報(自然科學版);2008年05期

2 陳曉東;蘇宛新;王化龍;;嵌入式SATA存儲系統的研究[J];電子技術應用;2008年04期

3 葉朝鋒;黃松嶺;徐云;童允;袁燕嶺;;基于SATA的嵌入式高速大容量數據存儲系統設計[J];電測與儀表;2008年02期

相關碩士學位論文 前6條

1 劉保府;多通道海量數據記錄系統設計[D];哈爾濱工程大學;2012年

2 鄧沖;J2ME在嵌入式Linux上的移植實現[D];華南理工大學;2010年

3 符強;基于H.264的嵌入式多媒體存儲系統的設計與應用[D];浙江工業大學;2010年

4 劉順成;基于SBC2440的Bootloader設計與實現[D];暨南大學;2008年

5 蔡弘;基于ARM+FPGA的高速信號采集與存儲系統設計[D];北京交通大學;2008年

6 蘇文濤;基于矢量水聽器陣的波束形成及DSP實現[D];西北工業大學;2007年

，

本文編號：2443366