本文選題：紙瓦楞夾層板 + 壓縮變形�。� 參考：《包裝工程》2016年03期

【摘要】：目的研究在不同壓縮速率下紙瓦楞夾層板的壓縮變形與塑性吸能特性。方法利用Hoff夾層板、正交各向異性彈性薄板理論和工程梁理論,研究瓦楞夾層板的橫向壓縮位移,分析瓦楞芯層的壓縮變形模式及塑性吸能特性,提出芯層結構的壓潰強度模型,并通過靜態壓縮實驗進行對比分析。結果B型、C型紙瓦楞夾層板的壓潰強度理論預測值分別為0.1195,0.0612 MPa,在1,12,18,48 mm/min的壓縮速率下,B型紙瓦楞夾層板的壓潰強度分別為0.1011,0.1071,0.1048,0.1075 MPa,C型紙瓦楞夾層板的壓潰強度分別為0.0462,0.0640,0.0475,0.0451 MPa。結論低應變率(低壓縮率)條件下,紙瓦楞夾層板的橫向壓縮性能影響基本不變,彈性強度、屈服強度、壓潰強度等基本相同。對于相同的材質,幾何參數對紙瓦楞夾層板的壓縮性能和塑性吸能影響較大。
[Abstract]:Aim to study the compression deformation and plastic energy absorption characteristics of paper corrugated sandwich plates at different compression rates. Methods using Hoff sandwich plate, orthotropic elastic thin plate theory and engineering beam theory, the transverse compression displacement of corrugated sandwich plate is studied, and the compression deformation mode and plastic energy absorption characteristics of corrugated core layer are analyzed. The crushing strength model of core structure is put forward, and the static compression experiment is carried out. Results the theoretical prediction values of the collapsing strength of B type paper corrugated sandwich plate were 0.1195 ~ 0.0612 MPa, respectively, and the crushing strength of B type paper corrugated sandwich board was 0.1011 ~ 0.1071 ~ 0.104 ~ (-1) ~ 0.1075 MPa / a at a compression rate of 1 ~ 12 ~ 1848 mm/min, respectively, and the crashing strength of B type paper corrugated sandwich plate was 0.04622 / 0.0640,0.04750.0451MPa, respectively. Conclusion under the condition of low strain rate (low compression ratio), the influence of transverse compression properties of paper corrugated sandwich plate is basically unchanged, and the elastic strength, yield strength and crushing strength are basically the same. For the same material, geometric parameters have a great effect on the compression performance and plastic energy absorption of the corrugated paper sandwich.
【作者單位】： 西安理工大學;
【基金】：國家自然科學基金(51345008) 教育部留學回國人員科研啟動基金
【分類號】：TB484.1

【相似文獻】

相關期刊論文 前4條

1 李萌;劉榮強;郭宏偉;王斌;丁北辰;;腿式著陸器用不同拓?fù)浣Y(jié)構金屬蜂窩吸能特性優化設計[J];振動與沖擊;2013年21期

2 羅昌杰;劉榮強;鄧宗全;李萌;沈進進;;薄壁金屬管塑性變形緩沖器吸能特性的試驗研究[J];振動與沖擊;2010年04期

3 葉晨炫;王志偉;;EPE和EVA發泡緩沖材料吸能特性表征[J];包裝工程;2012年01期

4 ;[J];;年期

相關碩士學位論文 前1條

1 黃滟;軸向沖擊下薄壁組合結構吸能特性分析[D];華中科技大學;2006年

，

本文編號：2105830