本文選題：變螺距 + 螺桿真空泵��； 參考：《真空科學與技術學報》2017年08期

【摘要】：以變螺距螺桿真空泵轉子為研究對象,建立主動轉子的三維有限元分析模型,對轉子在熱載荷作用下的溫度場和熱變形進行有限元分析。計算得到每一級的當量溫度和對流換熱系數,確定變螺距轉子熱邊界條件,對螺桿轉子的溫度場分布進行模擬分析,得出轉子的溫度分布規律,并進一步對轉子的熱變形進行研究。研究結果表明:變螺距轉子溫度場和熱變形分布均勻,最高溫度為146.97℃,最低溫度為68.30℃,軸向形變量最大值為0.41168 mm,徑向形變量最大值為0.17245mm,為變螺距螺桿真空泵的設計提供了理論依據。
[Abstract]:Taking the rotor of variable pitch screw vacuum pump as the research object, a three-dimensional finite element analysis model of the active rotor is established, and the temperature field and thermal deformation of the rotor under thermal load are analyzed by finite element method. The equivalent temperature and convection heat transfer coefficient of each stage are calculated, and the thermal boundary conditions of the rotor with variable pitch are determined. The temperature field distribution of the screw rotor is simulated and analyzed, and the temperature distribution law of the rotor is obtained. Furthermore, the thermal deformation of the rotor is studied. The results show that the temperature field and thermal deformation of the rotor with variable pitch are uniform, the highest temperature is 146.97 鈩，

本文編號：1928268