發布時間：2018-05-21 02:09

  本文選題：液壓滑閥 + 動網格�。� 參考：《液壓與氣動》2017年12期

【摘要】：采用基于動網格的流固耦合分析方法,建立了液壓滑閥開啟過程的三維動態數值分析模型,計算閥芯在驅動力、流體力和彈簧力共同作用下的運動分布、應力變化和形變。結果表明:提供一種分析液壓滑閥開啟過程的數值仿真方法,閥芯在開啟完畢達到穩態后仍有小幅振動;閥芯的徑向形變主要發生在閥桿上,且變形量隨時間產生小幅波動;閥芯由于油液的沖擊在入口處產生較大變形并在臺肩與閥桿連接處產生應力集中,采用CFD方法得到的液壓滑閥運動分布、應力變化、形變和理論值的誤差在可以接受的范圍內,證明了仿真的可靠性。
[Abstract]:Based on the fluid solid coupling analysis method based on dynamic grid, a three-dimensional dynamic numerical analysis model of the opening process of the hydraulic valve is established. The movement distribution, the stress change and the deformation of the valve core under the action of driving force, fluid force and spring force are calculated. The results show that a numerical simulation method for the opening process of the hydraulic slide valve is provided, and the valve core is provided. There is still a small amplitude vibration after the opening up to the steady state; the radial deformation of the valve core mainly occurs on the stem, and the deformation amount fluctuates with the time. The valve core produces a large deformation at the entrance due to the oil shock and produces stress concentration at the joint of the shoulder and the stem, and the distribution of the hydraulic slide valve is obtained by the CFD method, and the stress changes are changed. The accuracy of the simulation is proved to be acceptable within the acceptable range.
【作者單位】： 解放軍理工大學野戰工程學院;
【基金】：國家自然科學基金(51175511)
【分類號】：TH137.52
，

本文編號：1917257