本文選題：頻響函數　切入點：子結構　出處：《計算力學學報》2017年02期

【摘要】：在復雜工程結構頻響子結構分析中,各個子結構的頻響函數往往是由不同的部門獲得,各個子結構的頻響函數可能是在不同的坐標系下得到,亦或有些子結構具有某種對稱性,這需要對相應的子結構頻響函數進行旋轉和鏡像變換后才能進行整體拼接。此外,子結構拼接時交界面的連接點有時可能存在不一致,為了滿足位移協調和力平衡條件,本文基于界面主從位移控制原理,提出一種改進的頻響子結構方法,該方法既能考慮子結構的旋轉和鏡像變換,也能考慮子結構界面間的柔性連接,并可大幅提高計算效率。當界面位移控制陣為單位陣時,改進的方法退化為傳統的頻響子結構方法。數值算例驗證了所提方法的正確性和有效性。
[Abstract]:In the frequency response substructure analysis of complex engineering structures, the frequency response function of each substructure is often obtained by different departments. The frequency response function of each substructure may be obtained in different coordinate systems, or some substructures may have some symmetry.This requires rotation and image transformation of the corresponding substructure frequency response function before it can be stitched as a whole.In addition, the joint points of the interface may sometimes be inconsistent. In order to meet the conditions of displacement coordination and force balance, an improved frequency response substructure method based on the principle of interface master-slave displacement control is proposed in this paper.This method can not only consider the rotation and image transformation of substructure, but also consider the flexible connection between substructure interfaces, and greatly improve the computational efficiency.When the interfacial displacement control matrix is a unit matrix, the improved method is reduced to the traditional frequency response substructure method.Numerical examples show that the proposed method is correct and effective.
【作者單位】： 大連理工大學工業裝備結構分析國家重點實驗室工程力學系;
【基金】：國家重點研發計劃(2016YFB0200702) 國家自然科學基金(11232003,91515103) 111引智計劃(B14013) 中央高�；究蒲袠I(yè)務費專項資金(DUT15JJ(G)03)資助項目
【分類號】：TB11

【相似文獻】

相關期刊論文 前4條

1 傅慧忠,徐根棠;耳機聲旁路系統對聲頻響的控制[J];聲學技術;1986年02期

2 錢利軍;;雙通道電聲儀在傳聲器頻響測量中的應用[J];電聲技術;2008年09期

3 王旭永,駱涵秀;一種用閉環頻響法估測電液位置伺服系統參數的工程實驗方法[J];液壓氣動與密封;1995年04期

4 ;[J];;年期

，

本文編號：1715255