本文選題：共振頻率　切入點：軸向極化　出處：《煤炭技術》2016年02期 　論文類型：期刊論文

【摘要】：壓電陶瓷在壓電換能器中應用廣泛,其振動模式和頻率對壓電換能器的工作狀態及結構參數有著巨大影響,在對換能器設計和改良的過程中,如何得到共振頻率及狀態是需要解決的問題。借助ANSYS15.0,通過模態分析得到了軸向極化壓電陶瓷圓片的振動變形云圖,在此基礎上進行諧響應分析,得到了壓電陶瓷圓板的徑向共振頻率。通過與解析法得到的理論值及理想圓板共振頻率值對比發現ANSYS軟件在解決此類問題的有效性及便捷性。
[Abstract]:Piezoelectric ceramics are widely used in piezoelectric transducers. Its vibration mode and frequency have great influence on the working state and structural parameters of piezoelectric transducers. In the process of design and improvement of piezoelectric transducers, It is necessary to solve the problem of how to get resonance frequency and state. By means of ANSYS 15.0, the vibration deformation cloud diagram of axially polarized piezoelectric ceramic wafer is obtained by modal analysis, and the harmonic response analysis is carried out on this basis. The radial resonance frequency of piezoelectric ceramic circular plate is obtained and compared with the theoretical value obtained by analytical method and the resonance frequency value of ideal circular plate, it is found that ANSYS software is effective and convenient in solving this kind of problems.
【作者單位】： 上海應用技術學院機械工程學院;
【基金】：國家自然科學基金資助項目(51205257)
【分類號】：TB552

【相似文獻】

相關期刊論文 前1條

1 胡衛強;王敏慶;;振動測試中傳感器數目和位置設計的諧響應分析方法[J];噪聲與振動控制;2006年04期

，

本文編號：1601877