本文關鍵詞： 雙相機 工業攝影測量 測量重復性 坐標測量 長度測量　出處：《中國測試》2016年05期 　論文類型：期刊論文

【摘要】：雙相機工業攝影測量系統的廣泛應用使其測量性能越來越受到關注,如何準確合理地評價系統的測量性能,并制定相應檢定規范是目前亟待解決的問題。針對雙相機系統測量性能的測試問題提出一套系統的方法:首先對雙相機系統的攝影距離和基線長度等結構參數進行實驗,并選擇最佳參數進行系統的測量性能測試;然后對雙相機的測量重復性、三維坐標測量準確度與長度測量準確度進行測評;最后通過以上3個評價指標對雙相機系統測量性能進行總體分析與評價。該方法測得某型雙相機的自身測量重復性為0.027 mm,三維坐標測量準確度為0.060 mm,長度測量準確度為0.062 mm。據此推薦用測量重復性、三維坐標測量準確度、長度測量準確度3個指標對系統進行評價。
[Abstract]:With the wide application of dual-camera industrial photogrammetry system, more and more attention has been paid to its measurement performance. How to evaluate the measurement performance of the system accurately and reasonably? It is an urgent problem to establish the corresponding verification specification. A set of systematic methods for measuring the performance of dual-camera system is put forward. Firstly, the structural parameters of the dual-camera system, such as the camera distance and the baseline length, are tested. The measurement performance of the system is tested by selecting the best parameters, and then the repeatability of measurement, the accuracy of 3D coordinate measurement and the accuracy of length measurement are evaluated. Finally, the measurement performance of the dual camera system is analyzed and evaluated by the above three evaluation indexes. The repeatability of the measurement is 0.027 mm, the accuracy of 3D coordinate measurement is 0.060 mm, and the length measurement is accurate. The accuracy is 0.062 mm. accordingly, the repeatability of measurement is recommended. The accuracy of 3D coordinate measurement and the accuracy of length measurement were evaluated.
【作者單位】： 華北水利水電大學;辰維科技股份有限公司;
【分類號】：TB852
，

本文編號：1508953