本文關鍵詞： 包裝機 推料機構 ADAMS 柔性體 鉸鏈間隙　出處：《包裝工程》2017年05期 　論文類型：期刊論文

【摘要】：目的基于ADAMS軟件,對包裝機推料機構進行虛擬樣機建模。方法對機構進行仿真,在此基礎上建立鉸鏈間隙模型、柔性體模型和鉸鏈間隙柔性體都存在的模型。通過與理想模型運動曲線進行對比,分析各個鉸鏈間隙和連桿柔性對運動學規律的影響。結果運動副間隙(0.25 cm)對推料板的速度、加速度影響明顯,會產生振蕩現象;同時考慮運動副間隙(0.25 cm)和構件柔性,得到的速度、加速度曲線趨于平穩,緩解了鉸鏈間隙產生的沖擊。結論適當考慮連桿柔性,可以緩解鉸鏈間隙產生的振蕩,使推料板運動趨于穩定。
[Abstract]:Aim based on ADAMS software, the virtual prototyping model of the push mechanism of the packaging machine was established, and the hinge clearance model was established based on the simulation of the mechanism. By comparing with the ideal model, the effects of hinge clearance and linkage flexibility on kinematics are analyzed. The results show that the clearance of motion pair is 0.25 cm) and the velocity of push plate is about 0.25 cm, and the results are as follows: (1) the model of flexible body and the flexible body with hinge clearance are compared with the ideal model, and the effects of hinge clearance and linkage flexibility on kinematics are analyzed. The acceleration effect is obvious and the oscillation will occur, and the velocity and acceleration curve obtained by considering the clearance of motion pair (0.25 cm) and the flexibility of the component tend to be stable, which alleviates the impact caused by the hinge clearance. Conclusion the flexibility of connecting rod is considered appropriately. The oscillations produced by hinge clearance can be alleviated, and the movement of the pushing plate tends to be stable.
【作者單位】： 唐山學院;
【基金】：河北省科技廳項目(16221923)
【分類號】：TB486

【相似文獻】

相關期刊論文 前10條

1 張波;何國毅;班學;;流場中柔性體擺動尾跡模態分析[J];南昌航空大學學報(自然科學版);2014年02期

2 陸忠華;張爭艷;陳定方;;基于有限元法的柔性體變形實時模擬[J];武漢理工大學學報(交通科學與工程版);2012年04期

3 崔桐;宋愛國;吳涓;;一種用于力覺再現的柔性體變形仿真彈簧-質點模型[J];東南大學學報(自然科學版);2007年05期

4 李建橋,張志君,李因武,孫久榮;黃鼠柔性體表在體降阻行為研究[J];農業機械學報;2004年05期

5 朱雨童;湯亮;;一種柔性簇狀衛星動力學并行仿真方法[J];中國體視學與圖像分析;2010年03期

6 吳宏;王勇;;柔性體的有限質點模型彈道計算研究[J];彈箭與制導學報;2006年03期

7 崔桐;宋愛國;王愛民;張小瑞;陸熊;;具有簡單孔洞結構柔性體的力/觸覺框架模型[J];高技術通訊;2010年02期

8 楊元明,郭建生,董秋泉;具有確定運動姿態的柔性體的動力學建模[J];華中理工大學學報;1999年07期

9 ，

本文編號：1500876