發布時間：2019-02-22 18:28

【摘要】：伴隨著社會的進步，裝配式建筑及其優勢正日益受到廣泛的關注。由于國內大量住宅建設所造成的資源浪費、環境惡化等后果，建設部已多次倡導推動建筑工業化、發展裝配式建筑，從而推動住宅產業的升級。模塊化建筑作為一種新興的建筑體系具有高度的預制化比例，在國外已經進行了多年的發展，對提高工程質量、縮短工期、節約人力物力、保護環境等多方面有顯著的優勢，符合對于建筑工業化以及綠色建筑的發展要求。 本文首先對模塊化建筑的結構體系進行調研研究，介紹了目前比較常見的多種建筑模塊類型、模塊化建筑結構體系、模塊單元間的連接節點等以及基于BIM系統的模塊化建筑現代化施工方式。并結合國內建筑發展，對模塊化建筑的圍護結構進行選型研究。 本文選取天津市濱海旅游區擬建4層模塊化建筑公寓樣本樓為例，對模塊化建筑結構體系的受力特征進行研究，，其中包括對于4層公寓樣本樓的設計分析、靜力性能分析、動力時程分析、靜力彈塑性分析等。分析過程中，本文分別對模塊間連接節點剛度考慮剛接與鉸接兩種情況進行研究，比較節點剛度的不同對模塊化建筑結構受力性能的影響。 本文的重點是通過對模塊化建筑的調研與結構體系的研究，分析模塊化建筑這一新興的結構體系的受力特征及其對于國內建筑發展的適用性，對模塊化建筑技術的發展與推廣有一定的指導意義和參考價值。
[Abstract]:With the development of society, prefabricated architecture and its advantages have been paid more and more attention. Due to the waste of resources and the deterioration of environment caused by a large number of domestic housing construction, the Ministry of Construction has advocated many times to promote the industrialization of buildings and the development of prefabricated buildings, thus promoting the upgrading of the housing industry. As a new building system, modular building has a high ratio of prefabrication. It has been developed for many years in foreign countries. It has obvious advantages in improving engineering quality, shortening construction period, saving manpower and material resources, protecting environment and so on. In line with the building industrialization and green building development requirements. In this paper, the structure system of modular building is investigated and studied, and some common types of building modules, modular building structure system, are introduced in this paper. The connection node between module units and the modern construction mode of modular building based on BIM system. Combined with the development of domestic architecture, the selection of the retaining structure of modular building is studied. This paper chooses Tianjin Binhai tourist area as an example to study the mechanical characteristics of the modular building structure system, including the design analysis and static performance analysis of the 4-story apartment sample building. Dynamic time history analysis, static elastoplastic analysis, etc. In the process of analysis, the stiffness of the connection joint between modules considering the rigid connection and the hinge connection is studied in this paper, and the influence of the node stiffness on the mechanical performance of the modular building structure is compared. The emphasis of this paper is to analyze the mechanical characteristics of modular building as a new structure system and its applicability to the development of domestic architecture through the research of modular building and structural system. It has certain guiding significance and reference value for the development and popularization of modular building technology.
【學位授予單位】：天津大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TU391

【參考文獻】

相關期刊論文 前8條

1 鄧軍,唐家祥;時程分析法輸入地震記錄的選擇與實例[J];工業建筑;2000年08期

2 馬軍慶;;裝配式建筑綜述[J];黑龍江科技信息;2009年08期

3 陳建興;姜文偉;穆為;;Pushover分析在性能化抗震設計中的應用[J];結構工程師;2008年03期

4 趙欣;芬蘭和英國的產業化鋼結構住宅[J];建筑鋼結構進展;2003年S1期

5 侯愛波;汪夢甫;周錫元;;Pushover分析方法中各種不同的側向荷載分布方式的影響[J];世界地震工程;2007年03期

6 鄭小東;;住宅67,蒙特利爾,魁北克省,加拿大[J];世界建筑;2011年08期

7 曾令榮;吳雪樵;張彥林;;建筑工業化——我國綠色建筑發展的主要途徑與必然選擇[J];居業;2012年03期

8 俞寶達;俞寶明;;從模塊化建筑到模塊化施工[J];浙江建筑;2013年05期

本文編號：2428491