【摘要】：為了提高高溫?zé)岜眠\(yùn)行經濟性及穩定性,優化高溫系統流程,通過在熱泵系統中設置換熱器型經濟器,實驗驗證雙螺桿壓縮機補氣技術在高溫?zé)岜弥袘?yīng)用的可行性。實驗研究表明:將補氣技術應用于高溫?zé)岜檬强尚械?冷凝器出口水溫在88℃下通過經濟器補氣可有效增加高溫?zé)岜玫闹茻崃?當相對補氣量由9.88%增加至22.61%時,系統總制熱量增加9.28kW,改善了其制熱性能;在壓縮機補氣孔口已定條件下,存在最優補氣壓力,使該系統制熱能效比最大;經濟器的設置同時為冷凝器出口制冷劑提供較大的過冷度,保證了系統節流機構的安全運行。
[Abstract]:In order to improve the operation economy and stability of high temperature heat pump and optimize the flow of high temperature system, the feasibility of applying double screw compressor to high temperature heat pump was verified by setting a heat exchanger economizer in the heat pump system. The experimental results show that it is feasible to apply the gas supply technology to the high temperature heat pump, and the heating capacity of the high temperature heat pump can be effectively increased by using the economizer to replenish the water temperature of the condenser at 88 鈩，

本文編號：2373762