【摘要】：燒結墻體材料的高溫制備過程是通過高溫窯爐的燒結實現的,在燒結過程中,原料和燃料在高溫下都會產生細小的顆粒物,其中絕大部分屬于PM2.5粒子;針對目前廣泛使用的高硫劣質煤在燒結墻體材料制備工藝中的PM2.5排放問題開展研究,比較了煤的種類、燒結氣氛和溫度變化對排放的影響規律,結果表明:在低氧氣氛燃燒條件下,可以大大降低氮氧化物和硫氧化物的生成量;在溫度選擇方面,由于溫度過高會產生較多的氮氧化物和堿性氫氧化物,它們會與空氣中堿性物質反應生成PM2.5顆粒,所以選擇900~950℃是較為合適的最高燒成溫度。
[Abstract]:The preparation process of sintered wall materials at high temperature is realized by sintering in high temperature kiln. In the sintering process, fine particles are produced from raw materials and fuels at high temperature, most of which belong to PM2.5 particles. In this paper, the problem of PM2.5 emission of high-sulfur and low-quality coal in the preparation process of sintered wall materials is studied, and the effects of coal types, sintering atmosphere and temperature on the emission are compared. The results show that the amount of nitrogen oxide and sulfur oxide can be greatly reduced under the condition of low oxygen atmosphere combustion. In the aspect of temperature selection, because more nitrogen oxides and basic hydroxides can be produced when the temperature is too high, they react with alkaline substances in air to form PM2.5 particles, so the optimum sintering temperature is 900 鈩，

本文編號：2367222