本文選題：擦窗機 + 伸縮臂��； 參考：《長安大學》2014年碩士論文

【摘要】：近幾年來，隨著城鎮化建設步伐加快，高層建筑越來越多，高層建筑外墻清潔、安裝、維護等問題日益凸顯，這就為擦窗機提供了較大的發展空間。由于擦窗機屬非標產品，設計計算繁復、工作量大，目前傳統的設計方法效率低、精度差，很難滿足現代高性能擦窗機設計要求。為此，本文開發了擦窗機伸縮臂計算機輔助設計與優化系統。 提出了擦窗機作業范圍一定的前提下，，確定伸縮臂節數及長度尺寸的方法，該方法綜合考慮了材料利用率、制造成本、伸縮臂重量等因素，使伸縮臂設計方案更合理。依據相關擦窗機設計規范，對不同工況伸縮臂受力進行了分析，計算出危險截面應力。在滿足強度和作業尺寸要求的前提下，以伸縮臂重量輕、材料利用充分為目標，建立多目標擦窗機伸縮臂截面尺寸優化設計模型，并針對具體實例，給出優化設計結果。采用去材料的方法對優化后伸縮臂進行后處理，從而實現利用標準型材的同時減輕了伸縮臂重量。充分利用Visual Basic和Matlab編程語言各自的優勢，運用混合編程技術，開發出擦窗機伸縮臂計算機輔助設計計算與優化軟件，實現了伸縮臂長度尺寸的確定、截面尺寸的優化、方案圖紙的自動繪制等功能。 擦窗機伸縮臂設計計算方法的研究及相應的計算機輔助設計軟件的開發，有效地提高了擦窗機設計效率和質量，減輕了設計工作量。
[Abstract]:In recent years, with the acceleration of the pace of urbanization, more and more high-rise buildings, high-rise building exterior wall cleaning, installation, maintenance and other issues are increasingly prominent, which provides a large development space for window cleaning machines. Because the window cleaning machine is a non-standard product, the design calculation is complicated, the workload is heavy, and the traditional design method is low efficiency and poor precision, so it is difficult to meet the design requirements of modern high performance window cleaning machine. Therefore, a computer aided design and optimization system for the telescopic arm of window cleaning machine is developed in this paper. A method for determining the number and length of telescopic arm joints is proposed on the premise of certain working range of window polishing machine. The design scheme of telescopic arm is more reasonable by taking into account the factors of material utilization, manufacturing cost, weight of telescopic arm and so on. According to the design code of relevant window cleaning machine, the stress of telescopic arm under different working conditions is analyzed, and the dangerous section stress is calculated. On the premise of meeting the requirements of strength and operation size, the optimum design model of the section size of telescopic arm of multi-objective window cleaning machine is established with the aim of light weight of telescopic arm and full utilization of materials, and the optimization design result is given in the light of concrete examples. The post-treatment of the optimized retractive arm is carried out by the method of material removal, so that the weight of the telescopic arm can be reduced by using the standard profile at the same time. Making full use of the advantages of Visual basic and Matlab programming language, the computer aided design and optimization software for the telescopic arm of window polishing machine is developed by using the mixed programming technology, which realizes the determination of the length dimension of the telescopic arm and the optimization of the section size. Automatic drawing of project drawings and other functions. The research on the design and calculation method of the telescopic arm of the window cleaning machine and the development of the corresponding computer aided design software have effectively improved the design efficiency and quality of the window cleaning machine and reduced the design workload.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TU976.42;TP391.72

【參考文獻】

相關期刊論文 前10條

1 任曉丹;;基于VB機械優化設計軟件的研究與實現[J];電腦知識與技術;2010年06期

2 徐軍輝;MatrixVB——基于Matlab與VB的計算引擎[J];國外電子測量技術;2002年06期

3 胡智文,陳連運,余增亮;利用ActiveX技術的VB與Matlab間的無縫集成[J];計算機工程;2004年07期

4 李曉竹;尹玉萍;魏林;;VB與MATLAB間的無縫集成及其在故障診斷中的應用[J];計算機與數字工程;2007年03期

5 張華;祝志峰;董威;;我國裝修與高空作業機械行業的現狀及展望[J];建筑機械化;2006年05期

6 薛抱新,祝志鋒;高層建筑擦窗機的選型與建筑設計要求[J];建筑科學;2004年01期

7 隗燕琳;陳進明;;基于VB與Matlab的混合編程方法[J];計算機與數字工程;2013年08期

8 高劍;Matlab與VB混合編程的兩種方法[J];微機發展;2003年03期

9 張宏立,李吉吉;基于ActiveX機制的VB與MATLAB數據交換[J];新疆大學學報(自然科學版);2004年02期

10 孫偉;李朝峰;劉杰;聞邦椿;;基于VB的可視化設計計算系統研究與實現[J];中國機械工程;2008年19期

本文編號：2043232