本文選題：預制裝配式結構 + RCS混合結構��； 參考：《江蘇科技大學》2014年碩士論文

【摘要】：混凝土柱-鋼梁混合結構（reinforcedconcretecolumn-steelbeam，RCS）充分發揮了鋼與混凝土兩種材料各自的優點，是一種可持續發展的結構體系，其綜合性能要優于傳統鋼筋混凝土框架結構和鋼框架結構，被稱為“低成本高效率”的結構形式。將這種體系應用到預制裝配式當中，發展裝配式混合結構體系，這對于改變我國粗放型建筑施工作業，順應建筑產業化發展趨勢，無疑具有重要的經濟和社會意義。為充分發揮混合結構（RCS）體系的優點，本文結合削弱外伸節點的特點和耗能減震技術的研究，提出了3種不同的干作業螺栓連接方式混合節點。 為了研究全裝配式RCS混合結構節點的抗震性能，根據提出的3種不同的干作業螺栓連接混合節點，通過擬靜力試驗，分別對節點構件的破壞特征、破壞機理以及承載能力、延性和耗能能力等抗震性能進行了試驗研究。研究結果表明：（1）結合鋼結構削弱外伸梁端節點的理念，將塑性鉸的位置從梁端外移到削弱處，能避免塑性鉸對核心區的不利影響，實現強柱弱梁的抗震設計要求；（2）采用單蓋板連接的鋼梁拼接節點，其耗能性能不如雙蓋板連接的鋼梁拼接節點；（3）采用無箍筋的鋼構套構造，節點核心區具有較高的承載能力和良好的耗能性能；（4）蓋板拼接節點的滯回曲線呈Z字型，反映出存在較大滑移的影響；（5）外伸端板的半剛性連接節點，其滯回曲線呈紡錘形，端板屈曲能較好地耗散能量，具有良好的抗震性能；（6）蓋板內側設置摩擦銅片后，能起到很好的耗能效果；通過合理設計，震后破損的構件還可能實現修復和替換功能。 在試驗研究基礎上，結合試驗的破壞特征，使用非線性連接單元，建立用于框架結構分析的耗能拼接節點的彎矩—轉角模型，對該RCS混合結構耗能節點進行數值模擬。通過對比可以發現，數值模擬曲線和試驗曲線基本一致，因此，可以利用該連接單元模擬實際的摩擦耗能拼接節點。 為了研究全裝配式RCS混合結構節點耗能對框架結構整體抗震性能影響，利用SAP2000建立普通框架結構和帶摩擦耗能節點的框架結構，進行了模態分析，用位移控制法在兩種加載模式下進行靜力彈塑性推覆分析，研究表明：連接的剛度會影響結構的低階自振周期，但是對高階模態影響很小；采用耗能節點的全裝配式RCS混合結構能夠有效減少底部受力，，表現出較好的延性；結構的層位移角都符合抗震規范的要求。
[Abstract]:Concrete column-steel beam composite structure (RCSs) gives full play to the advantages of both steel and concrete materials, and is a kind of structure system of sustainable development. Its comprehensive performance is better than that of traditional reinforced concrete frame structure and steel frame structure. It is called "low cost and high efficiency" structure form. It is of great economic and social significance to apply this system to the prefabricated assembly and develop the prefabricated hybrid structure system, which is of great economic and social significance for changing the extensive construction work and conforming to the development trend of building industrialization. In order to give full play to the advantages of hybrid structure (RCSs) system, combined with the characteristics of weakening outstretched joints and the study of energy dissipation technology, three different types of dry-working bolted joints are proposed. In order to study the seismic behavior of fully assembled RCS hybrid structure joints, according to the three kinds of different dry working bolted joints, the failure characteristics, failure mechanism and bearing capacity of the joints were tested by pseudo-static test. The seismic performance such as ductility and energy dissipation capacity are studied experimentally. The research results show that combining with the idea that steel structure weakens the end joints of outstretched beams, the position of plastic hinge is moved from the end of beam to the place of weakening, which can avoid the adverse effect of plastic hinge on the core region and meet the seismic design requirements of strong column and weak beam. (2) the energy dissipation performance of the steel beam splicing joint with single cover plate is lower than that of the steel beam splicing joint with double cover plate. The joint is constructed with steel jacket without stirrups, and the core area of the joint has higher bearing capacity and better energy dissipation performance. (4) the hysteretic curve of the joint of cover plate is Z shape, which reflects that there is a great influence of slip on the semi-rigid connection joint with extended end plate. The hysteretic curve of the hysteretic joint is spindle-shaped, and the end-plate buckling can dissipate energy well and has good seismic performance. 6) the friction copper plate on the inner side of the cover plate can play a good energy dissipation effect, and the damaged components may be repaired and replaced by reasonable design. On the basis of experimental research and combined with the failure characteristics of the test, the moment-rotation model of the energy dissipation joint used in the analysis of frame structure is established by using nonlinear connection element, and the numerical simulation of the energy dissipation node of the RCS hybrid structure is carried out. By comparison, it is found that the numerical simulation curve and the experimental curve are basically the same. Therefore, the connection element can be used to simulate the actual friction energy dissipation joints. In order to study the effect of energy dissipation on the whole seismic performance of frame structure with fully assembled RCS hybrid structure, the general frame structure and the frame structure with friction energy dissipation joint are established by SAP2000, and the modal analysis is carried out. The static elastic-plastic nappe analysis is carried out under two loading modes by using the displacement control method. The results show that the stiffness of the connection will affect the low-order natural vibration period of the structure, but it has little effect on the high-order modes. The fully assembled RCS hybrid structure with energy-dissipation joints can effectively reduce the stress at the bottom and show good ductility, and the displacement angles of the structure all meet the requirements of seismic code.
【學位授予單位】：江蘇科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TU352.11;TU398.9

【參考文獻】

相關期刊論文 前10條

1 張瀑;魯兆紅;淡浩;;汶川地震中預制裝配整體結構的震害調查分析[J];四川建筑科學研究;2010年03期

2 李振寶;董挺峰;閆維明;周錫元;;混合連接裝配式框架內節點抗震性能研究[J];北京工業大學學報;2006年10期

3 趙斌,呂西林,劉麗珍;全裝配式預制混凝土結構梁柱組合件抗震性能試驗研究[J];地震工程與工程振動;2005年01期

4 范力;呂西林;趙斌;張繼承;;裝配式預制混凝土框架結構擬動力試驗研究[J];地震工程與工程振動;2007年06期

5 李英民;韓軍;田啟祥;陳偉賢;趙盛位;;填充墻對框架結構抗震性能的影響[J];地震工程與工程振動;2009年03期

6 胡大柱;李國強;孫飛飛;王開強;;半剛性連接組合框架地震反應分析[J];工程抗震與加固改造;2007年01期

7 郁有升;王燕;;鋼框架梁翼緣削弱型節點力學性能的試驗研究[J];工程力學;2009年02期

8 李楠;張季超;楚先鋒;劉波;;預制混凝土結構后澆整體式梁柱節點抗震性能試驗研究[J];工程力學;2009年S1期

9 陳適才;閆維明;李振寶;王文明;高杰;;大型預制混凝土梁柱疊合板中節點整體抗震性能試驗研究[J];工程力學;2012年02期

10 許勇;劉波;張季超;陳原;楊作用;王可怡;;新型裝配整體式混凝土結構主次梁節點試驗研究[J];工業建筑;2009年08期

本文編號：2041706