本文選題：部分熱回收 + 風冷熱泵　； 參考：《科學技術與工程》2014年32期

【摘要】：以一臺額定制冷(熱)量為45 k W的部分熱回收風冷熱泵機組為平臺,研究和分析了樣機在名義制冷、名義制熱工況,在保持使用側和熱回收側水流量不變條件下,開啟熱回收功能后得到出水溫度為45℃和50℃熱水時樣機的運行參數和性能變化規律。結果表明,在名義制冷工況45℃和50℃熱水出水溫度時,樣機制冷性能系數(COP)比無熱回收分別變化-10.55%~1.09%和3.64%~12.73%,熱回收綜合制冷COP分別達到3.38~3.69和2.98~3.15,出水溫度由45℃升高到50℃且分別采用單雙風機冷凝時,樣機制冷COP下降2.44%~4.68%;在名義制熱工況熱水45℃和50℃出水溫度時,樣機制熱COP比無熱回收降低10.96%~21.58%,50℃出水時制熱COP比45℃出水時升高4.42%,熱回收綜合制熱COP分別達到了3.28和3.09。
[Abstract]:On the platform of a 45 kW rated heat recovery air-cooled heat pump unit, this paper studies and analyses the prototype in nominal refrigeration and nominal heating condition, while maintaining the constant water flow rate on the service side and the heat recovery side. After the heat recovery function was turned on, the operating parameters and performance of the prototype were obtained when the effluent temperature was 45 鈩，

本文編號：1942108