本文關鍵詞：山西制造業與生產性服務業共生關系研究　出處：《山西財經大學》2017年碩士論文　論文類型：學位論文

  更多相關文章： 制造業 生產性服務業 產業共生關系

【摘要】：近兩年來,全國經濟增長速度放緩,山西的經濟出現了斷崖式下滑,在2015、2016年經濟增速均處于全國末位。從產業維度來看,這是由于山西的產業結構單一,傳統的產業格局難以抵抗外來的需求性沖擊。在供給側改革的背景之下,山西試圖通過振興制造業,扶持新興支柱性產業調整經濟結構。其中生產性服務業能夠?yàn)橹圃鞓I(yè)提供不可缺少的中間需求產品,助力制造業的發展。因此兩者間的關系就成為本文的研究重點。本文從制造業與生產性服務業的關系入手,利用了產業間分工理論、交易成本理論、產業鏈理論構建了產業共生的一般機理分析,著重從分工與產業鏈視角分析了制造業與生產性服務業的共生組織模式,并認為兩者間的共生關系會隨著工業化程度的加深而優化。在實證研究方面,本文首先對山西的工業化進程做出了基本判斷,然后對山西的制造業與生產性服務業的發展現狀作出了分析,并發現在山西資源型經濟中,制造業由于受到資源型產業的“擠出”并未成為工業化的主要推動力。然后根據產業共生機理,并結合當前山西工業化的發展特點,從融合性、互動性、協調性三方面推演出三個有關共生關系的命題:1.在資源型經濟中,隨著工業化的不斷演進,制造業與生產性服務業的融合性會不斷增大,且逐步趨于均衡。2.在資源型經濟中,隨著工業化的不斷演進,制造業與生產性服務業的互動性會不斷增加,且逐步趨于均衡。3.在資源型經濟中,隨著工業化的不斷演進,制造業與生產性服務業的協調性會趨于優化。最后通過投入產出法和耦合度協調分析的方法,對山西的制造業與生產性服務業的融合性、互動性、協調性三個維度做出了實證分析,并證實了三個命題。最終的結果表明,在山西資源型經濟體系中,制造業與生產性服務業的共生關系尚處于“非均衡互利共生”階段;產業間共生關系的發展雖然受到“擠出”,但是總體發展向好。通過以上的理論和實證研究分析,本文認為山西省可以通過振興制造業優勢產業尤其是裝備制造業,充分發揮其關聯帶作用,與此同時扶持生產性服務業助力于制造業的發展升級,形成推動經濟進步的內生性雙向驅動系統,從而突破原有的產業格局。
[Abstract]:In the past two years, the national economic growth rate has slowed, and Shanxi's economy has declined precipitously. In 2015, 2016, the economic growth rate was at the end of the country. This is because the industrial structure of Shanxi is single, the traditional industrial pattern is difficult to resist the external demand impact. Under the background of supply-side reform, Shanxi tries to revitalize the manufacturing industry. Support the new pillar industries to adjust the economic structure, in which producer services can provide indispensable intermediate products for the manufacturing industry. Therefore, the relationship between the two becomes the focus of this paper. This paper starts with the relationship between manufacturing and producer services, and makes use of the theory of inter-industry division of labor and transaction cost theory. The industrial chain theory constructs the general mechanism analysis of industrial symbiosis, focusing on the analysis of the symbiotic organization model between manufacturing and producer services from the perspective of division of labor and industrial chain. And think that the symbiotic relationship between the two will be optimized with the deepening of industrialization. In the empirical research, this paper first made a basic judgment on the industrialization process of Shanxi. Then it analyzes the current situation of manufacturing and producer services in Shanxi Province, and finds out that it is in the resource-based economy of Shanxi Province. The manufacturing industry has not become the main driving force of industrialization because of being "squeezed out" by resource-based industries. Then according to the mechanism of industrial symbiosis and the development characteristics of current industrialization in Shanxi Province, the integration and interactivity are taken into account. In resource-based economy, with the continuous evolution of industrialization, the integration of manufacturing and producer services will continue to increase. In resource-based economy, with the continuous evolution of industrialization, the interaction between manufacturing and producer services will continue to increase, and gradually tend to balanced .3. in resource-based economy. With the continuous evolution of industrialization, the coordination between manufacturing and producer services will tend to optimize. Finally, through the input-output method and coupling degree coordination analysis method. This paper makes an empirical analysis of the integration, interaction and coordination of the manufacturing industry and producer services in Shanxi, and confirms the three propositions. The final result shows that in the resource-based economy system of Shanxi Province. The symbiotic relationship between manufacturing and producer services is still in the stage of "unbalanced and mutually beneficial symbiosis"; Although the development of the symbiotic relationship between industries has been "squeezed out", the overall development is better. Through the above theoretical and empirical research and analysis. This paper holds that Shanxi Province can give full play to the role of the association zone by revitalizing the manufacturing industry, especially the equipment manufacturing industry, and at the same time support the producer service industry to help the development and upgrading of the manufacturing industry. Form an endogenous bidirectional driving system to promote economic progress, thus breaking through the original industrial pattern.
【學位授予單位】：山西財經大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F427;F719

【參考文獻】

相關期刊論文 前10條

1 李志強;吳心怡;;產業協調發展對區域經濟的影響研究——基于制造業與生產性服務業面板數據模型的分析[J];商業研究;2016年04期

2 楚明欽;;長三角產業區域分工與合作——基于生產性服務業與裝備制造業融合的研究[J];云南財經大學學報;2016年01期

3 王成東;綦良群;;中國裝備制造業與生產性服務業融合研究[J];學術交流;2015年03期

4 綦良群;蔡淵淵;王成東;;我國裝備制造業與生產性服務業互動作用及效率評價研究[J];中國科技論壇;2015年01期

5 陳曉峰;陳昭鋒;;生產性服務業與制造業協同集聚的水平及效應——來自中國東部沿海地區的經驗證據[J];財貿研究;2014年02期

6 林木西;崔純;;中國裝備制造業和生產性服務業互動發展的區域比較[J];工業技術經濟;2013年06期

7 楚明欽;;裝備制造業與生產性服務業產業關聯研究——基于中國投入產出表的比較分析[J];中國經濟問題;2013年03期

8 張丁榕;;長三角地區生產性服務業與制造業的產業關聯分析——基于投入產出法的分析[J];石家莊經濟學院學報;2013年02期

9 劉軍躍;李軍鋒;鐘升;;生產性服務業與裝備制造業共生關系研究——基于全國31省市的耦合協調度分析[J];湖南科技大學學報(社會科學版);2013年01期

10 王玉珍;;資源型經濟及其工業化體系催生:山西與江蘇[J];改革;2012年12期

，

本文編號：1436493