發布時間：2018-06-18 07:24

  本文選題：戶用智能供暖溫度控制器 + 自動測試系統��； 參考：《昆明理工大學》2014年碩士論文

【摘要】：近年來,國家大力提倡建立“資源節約型、環境友好型”社會理念,因而在我國北方,其家用供暖系統采用戶用智能溫度控制器的越來越多。但在使用過程中,控制器產品的生產質量和控制性能的好壞,會直接影響到資源效率的利用率和用戶的經濟利益。因此,為了適應戶用智能供暖溫度控制器批量生產的要求,在出廠前必須針對控制器的控制效果以及老化性能等進行嚴格的測試,以保證各項性能指標能夠符合國內外相關技術標準和技術要求。 傳統的溫度控制器測試系統大都結構簡單,功能單一,主要以手動測試和半自動測試方式為主,測試效率低,且難以保證其測試質量。在當今企業轉型升級過程中,迫切需要開發出一套測試模式清晰、測試操作方便并能進行數據分析的溫度控制器自動測試系統,用于對批量生產后的戶用智能供暖溫度控制器進行綜合檢測,以保證戶用智能供暖溫度控制器工作時的運行可靠性與準確性。 本文在分析供暖溫度控制器發展現狀和控制器測試系統基本概念的基礎上,對供暖溫度控制器的硬件結構功能、測試類型、測試方法以及測試目標等進行了研究。然后,提出了其自動測試系統的總體設計方案并進行研發,研究內容包括系統需求分析、硬件系統構成以及軟件編程等內容,主要完成的工作有如下三個方面： 1.提出了戶用智能供暖溫度控制器自動測試系統的總體設計方案,包括系統構成、測試體系、硬軟件組成； 2.提出了戶用智能供暖溫度控制器自動測試系統硬件部分的設計與實現方案,主要包含接口電路及各個子系統的硬件設計與實現； 3.設計并開發了戶用智能供暖溫度控制器自動測試系統接口通信軟件與測試系統上位機全套軟件。 為了驗證所開發的戶用智能供暖溫度控制器自動測試系統可行性,本文在實驗室構建了一個模擬供暖環境,對我們所開發的具有完全自主知識產權的戶用智能供暖溫度控制器產品進行了實際測試運行和分析。運行結果表明,該測試系統可以根據用戶任意時間段的需求進行隨機測試模式測試和出廠前的大綱測試模式測試。測試數據分析結果還表明,該戶用智能供暖溫度控制器自動測試系統能完全滿足戶用智能溫度控制器的測試要求,達到了預期的效果。
[Abstract]:In recent years, the country strongly advocated the establishment of "resource-saving, environment-friendly" social concept, so in the north of China, the household heating system using intelligent temperature controller more and more. But in the process of using, the production quality and control performance of controller will directly affect the utilization of resource efficiency and the economic benefits of users. Therefore, in order to meet the requirements of mass production of the intelligent heating temperature controller for household use, the control effect and aging performance of the controller must be strictly tested before leaving the factory. To ensure that the performance indicators can meet the relevant technical standards and technical requirements at home and abroad. Most of the traditional temperature controller test systems are simple in structure and single in function. The main methods are manual test and semi-automatic test. The test efficiency is low and the quality of the test is difficult to guarantee. In the process of enterprise transformation and upgrading, it is urgent to develop an automatic test system of temperature controller with clear test mode, convenient test operation and data analysis. It is used to test the indoor intelligent heating temperature controller after batch production, so as to ensure the operation reliability and accuracy of the household intelligent heating temperature controller. Based on the analysis of the development of the heating temperature controller and the basic concept of the controller test system, this paper studies the hardware structure function, test type, test method and test target of the heating temperature controller. Then, the overall design scheme of the automatic test system is put forward and developed. The research content includes system requirement analysis, hardware system structure and software programming. The main work is as follows: 1. The overall design scheme of the automatic test system for indoor intelligent heating temperature controller is put forward, including system composition, test system, hardware and software composition; 2. This paper presents the design and implementation of the hardware part of the automatic test system of the intelligent heating temperature controller for the household, which mainly includes the interface circuit and the hardware design and implementation of each subsystem. 3. The interface communication software of home intelligent heating temperature controller automatic test system and the whole software of the upper computer of the test system are designed and developed. In order to verify the feasibility of the automatic test system of the intelligent household heating temperature controller, a simulated heating environment is constructed in this paper. The domestic intelligent heating temperature controller with completely independent intellectual property is tested and analyzed. The running results show that the test system can carry out random test mode test and outline test mode test before production according to the requirements of users in any time period. The results of test data analysis also show that the automatic test system of the household intelligent heating temperature controller can fully meet the test requirements of the household intelligent temperature controller and achieve the desired results.
【學位授予單位】：昆明理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TU855;TU832

【參考文獻】

相關期刊論文 前5條

1 汪紀鋒;黃進;楊承志;王彬;;跟蹤誤差的增量式模型預測控制[J];重慶大學學報;2013年12期

2 范江波;尚飛;;基于單片機的智能供暖節能控制器設計[J];哈爾濱職業技術學院學報;2012年03期

3 蔡小斌,王紅,王宏偉;法國通用自動測試平臺ATE發展綜述[J];測控技術;2000年06期

4 席裕庚;李德偉;;預測控制定性綜合理論的基本思路和研究現狀[J];自動化學報;2008年10期

5 席裕庚;李德偉;林姝;;模型預測控制——現狀與挑戰[J];自動化學報;2013年03期

，

本文編號：2034672