MRIL-P型核磁共振測井資料處理解釋軟件的設計與實現
本文選題:MRIL-P型核磁 + 數據預處理。 參考:《吉林大學》2017年碩士論文
【摘要】:目前,P型核磁共振測井儀是國內應用比較多、效果也比較好的核磁共振測井儀器,主要使用Petrosite軟件進行資料的處理解釋。該軟件的價格比較昂貴,而且由于缺少軟件的源代碼,所以很難在其上進行有針對性的二次開發。開發一套有自主知識產權的核磁共振測井資料處理解釋軟件,一方面可以作為核磁共振測井資料的國外處理解釋方法和系統的部分替代品降低成本;另一方面,在以后的生產科研中可以進行有針對性的二次開發,有利于推廣和完善核磁共振測井資料處理解釋技術,對油田的勘探開發工作起到積極的作用。本文從P型核磁共振測井資料處理流程的角度出發,開發了數據格式解編、觀測模式的分析和自動識別、原始測量數據預處理、T2譜反演與區間孔隙分離、儲層參數計算、核磁成果圖開發與鏈狀處理流程等軟件模塊。在時間域m.cls數據格式解編上,通過分析數據特點,成功提取了原始數據信息,與引進軟件對比保持一致;在原始數據預處理上,通過對80余種觀測模式的分析,實現了模式自動識別,確定了 5個步驟實現回波串?dāng)?shù)據的提取;基于奇異值分解截?cái)喾ㄩ_發了 T2譜反演方法,并采用三次樣條插值實現了 T2譜平滑和拼接,反演得到的總孔隙度和有效孔隙度曲線均與引進軟件效果保持基本一致,平均絕對誤差小于0.3%;根據多種方法完成了滲透率參數計算,并與常規曲線結合利用雙水模型求取了含水飽和度,兩條曲線的計算結果都與引進軟件處理結果吻合;在軟件開發上,通過鏈狀處理流程技術和高效繪圖技術,使整套軟件的處理效率大大提高,較引進軟件提高3倍以上。通過選取若干井次的核磁測井資料對軟件處理結果進行了驗證和評價,本文開發的軟件可滿足核磁測井的實際需要。在論文的最后,對本軟件的發展和應用前景進行了分析和展望。
[Abstract]:At present, P NMR logging tool is a nuclear magnetic resonance logging tool with more application and better effect in China. It mainly uses Petrosite software to process and explain the data. The price of the software is very expensive, and because of the lack of software source code, it is difficult to develop a targeted two development. NMR logging data processing and interpretation software of main intellectual property rights can be used as a foreign processing and interpretation method of magnetic resonance logging data and some substitutes of the system to reduce cost. On the other hand, two times of targeted opening can be carried out in future production and scientific research, which is beneficial to the promotion and improvement of NMR logging funds. The data processing and interpretation technology plays an active role in the exploration and development of the oil field. From the point of view of the P NMR logging data processing process, this paper develops the data format solution, the analysis and automatic recognition of the observation mode, the preprocessing of the original measurement data, the T2 spectral inversion and the interval separation, the calculation of the reservoir parameters and the NMR results In the time domain m.cls data format, the original data information is successfully extracted by analyzing the data format of the time domain. In the original data preprocessing, the pattern recognition is realized through the analysis of more than 80 kinds of observation modes, and 5 steps are determined to realize the return. The T2 spectral inversion method is developed based on the singular value decomposition and truncation method, and the T2 spectrum smoothing and splicing are realized by three spline interpolation. The total porosity and effective porosity curves obtained by the inversion are all consistent with the imported software, and the average absolute error difference is less than 0.3%. The parameters are calculated and the water saturation is obtained by using the double water model combined with the conventional curve. The results of the two curves are all consistent with the results of the imported software. In the software development, the processing efficiency of the whole software is greatly improved by the chain processing technology and the efficient drawing technology, and 3 times more than that of the imported software. The results of the software processing are verified and evaluated by the NMR logging data from several wells. The software developed in this paper can meet the actual needs of NMR logging. At the end of the paper, the development and application prospect of the software are analyzed and prospected.
【學位授予單位】:吉林大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:P631.83
【相似文獻】
相關期刊論文 前10條
1 王安慶 ,張紅英;核磁共振測井技術在四川的應用[J];天然氣工業;2001年05期
2 張?jiān)?核磁共振測井前沿技術國際研討會成功舉行[J];測井技術;2005年04期
3 荊三紅;;現代常用核磁共振測井儀器的性能比較[J];科技資訊;2008年01期
4 陳文升;核磁共振測井典型方案的研究[J];長春地質學院學報;1994年03期
5 孫建孟,肖承文,謝又新,王煥增;儲層傷害的礦場評價新手段——核磁共振測井[J];鉆井液與完井液;2000年06期
6 寧從前,譚廷棟,李寧;核磁共振測井在我國油田應用分析[J];勘探家;2000年04期
7 張松揚,范宜仁;核磁共振測井技術評述[J];勘探地球物理進展;2002年04期
8 王才志,尚衛忠;應用奇異值分解算法的核磁共振測井解譜方法[J];石油地球物理勘探;2003年01期
9 張辛耘;核磁共振測井儀器研制進展[J];測井技術;2004年05期
10 李國軍;核磁共振測井在儲層評價中的應用[J];內蒙古石油化工;2005年01期
相關會議論文 前3條
1 王紹民;劉明新;楊元軍;趙培華;賈芬淑;;核磁共振測井在油田開發中的應用[A];西部大開發 科教先行與可持續發展——中國科協2000年學術年會文集[C];2000年
2 孫德杰;高秋濤;王志強;;核磁共振測井技術在油田開發中的應用[A];中國地球物理學會第22屆年會論文集[C];2006年
3 李洋;肖立志;;核磁共振測井TDA方法識別油氣影響因素研究[A];第十六屆全國波譜學學術會議論文摘要集[C];2010年
相關重要報紙文章 前5條
1 記者 許忠 通訊員 邵黎飛;核磁共振測井技術走進吐哈油田[N];中國石油報;2007年
2 本報記者 張貴志;向裝備要效益[N];中國石油報;2002年
3 束洪福邋焦利娜;讓知識之樹在祖國沃土上開花結果[N];科技日報;2008年
4 通訊員 湯波 記者 夏靜;我國用核磁共振勘探油氣總量居世界前列[N];光明日報;2006年
5 本報通訊員 孟憲庭 易衍蓮;情系核磁[N];中國石油報;2001年
相關博士學位論文 前1條
1 吳磊;多頻核磁共振測井方法及若干問題研究[D];華中科技大學;2011年
相關碩士學位論文 前10條
1 王勇軍;核磁共振測井信號處理分析與軟件研發[D];電子科技大學;2014年
2 劉恒;核磁共振測井應用研究-XX油田儲層孔隙結構評價與油水識別[D];長江大學;2016年
3 柏強;MRIL-P型核磁共振測井采集工藝研究[D];中國石油大學(華東);2015年
4 辛璐;MRIL-P型核磁共振測井資料處理解釋軟件的設計與實現[D];吉林大學;2017年
5 徐志星;隨鉆核磁共振測井關鍵技術研究[D];華中科技大學;2013年
6 黃華松;核磁共振測井的若干問題研究[D];華中科技大學;2012年
7 姜占西;核磁共振測井在大慶油田的應用研究[D];吉林大學;2006年
8 楊興;核磁共振測井?dāng)?shù)據處理與分析研究[D];中國海洋大學;2013年
9 李靜葉;P型核磁共振測井?dāng)?shù)據處理與在大慶油田的應用[D];吉林大學;2012年
10 肖飛;核磁共振測井應用研究[D];長江大學;2012年
,本文編號:1984327
本文鏈接:http://sikaile.net/falvlunwen/zhishichanquanfa/1984327.html