本文選題：四履帶張緊器 + 臍帶纜��； 參考：《哈爾濱工程大學》2013年碩士論文

【摘要】：深水臍帶纜四履帶張緊器是用于臍帶纜鋪設的重要設備，是臍帶纜安裝系統的核心部分，其主要作用是夾持纜線，并能在鋪設過程中以一定的速度恒張力均勻收、放纜線。該課題隸屬于中海石油深海開發有限公司的《臍帶纜安裝系統關鍵部件（張緊器）研制》研究項目，目的在于開發研究一種具有自主知識產權的海洋鋪纜船用張緊器。本論文的主要研究對象是四履帶張緊器結構設計與關鍵技術，包括機械結構總體方案與詳細零部件設計、液壓與控制系統方案和陸地試驗方案。 首先，論文介紹了國內外柔性管道張緊器的發展概況與技術現狀，并根據臍帶纜安裝系統和四履帶張緊器的設計要求與制造標準，確定了履帶系統總成的關鍵設計參數，提出了深水臍帶纜四履帶張緊器的總體設計方案。 其次，論文對深水臍帶纜四履帶張緊器關鍵零部件進行了詳細結構設計，主要包括密封式鏈軌節總成與履帶靴、支重輪、托鏈輪、驅動輪總成、引導輪總成、懸掛系統、履帶箱梁、主內外框架和角度調整底座。 然后，論文通過對四履帶張緊器的受力情況進行分析，借助理論分析計算和有限元分析軟件，對主要承載零部件進行了力學分析與強度校核，并對履帶總成系統進行了動力學仿真分析，，驗證結構設計的正確性與可靠性。 最后，論文確定了四履帶張緊器的液壓系統與電氣控制系統及陸地試驗方案。液壓系統包括液壓系統原理圖、液壓系統元件的主要參數和液壓缸及液壓泵選型；電氣控制系統包括電氣控制系統總體方案、各功能執行模塊和電機設計選型；陸地試驗方案包括設備檢查、功能試驗和靜拉力試驗。
[Abstract]:The four-track tensioner of deep water umbilical cord cable is an important equipment for cord laying and the core part of the cord installation system. Its main function is to hold the cable, and can evenly collect and release the cable at a certain speed and constant tension during the laying process. This subject belongs to the research project of the key component (tensioner) of the cord installation system of CNOOC Deepwater Development Co. Ltd. The purpose of which is to develop a kind of marine cable tensioner with independent intellectual property rights. The main research object of this paper is the structure design and key technology of four-track tensioner, including the overall scheme of mechanical structure and detailed parts design, hydraulic and control system scheme and land test scheme. Firstly, the paper introduces the development and technology of flexible pipeline tensioner at home and abroad, and according to the design requirements and manufacturing standards of cord cable installation system and four-track tensioner, the key design parameters of crawler system assembly are determined. The overall design scheme of four-track tensioner for deep-water umbilical cord cable is presented. Secondly, the paper designs the key parts of the four-track tensioner of deep-water umbilical cord in detail, mainly including the sealed chain rail link assembly and crawler boot, support wheel, sprocket wheel, drive wheel assembly, guide wheel assembly, suspension system, etc. Caterpillar box girder, main inside and outside frame and angle adjustment base. Then, through the analysis of the stress of the four-track tensioner, with the aid of theoretical analysis and finite element analysis software, the mechanical analysis and strength check of the main load-bearing parts are carried out. The dynamic simulation analysis of the track assembly system is carried out to verify the correctness and reliability of the structure design. Finally, the hydraulic system and electrical control system of the four-track tensioner and the land test scheme are determined. The hydraulic system includes the schematic diagram of the hydraulic system, the main parameters of the hydraulic system components and the selection of the hydraulic cylinder and hydraulic pump, the electrical control system includes the overall scheme of the electrical control system, each functional execution module and the type selection of the motor design. The terrestrial test plan includes equipment inspection, function test and static tension test.
【學位授予單位】：哈爾濱工程大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TE952

【參考文獻】

相關期刊論文 前10條

1 李春艷;馮付勇;;履帶車輛靜態輪荷計算與距地高實現[J];車輛與動力技術;2008年03期

2 陳凱;夏峰;葉信紅;郭宏;張永明;鐘科星;;水下生產系統用臍帶纜試制關鍵工藝介紹[J];電線電纜;2012年02期

3 蒯行成,程露敏,易文質,陳容和;坦克履帶摩擦副力學模型及其強度分析[J];湖南大學學報(自然科學版);1992年02期

4 梁賀明;陳思忠;游世明;;油氣懸架數學建模及仿真研究[J];計算機仿真;2006年04期

5 高一平,王欣,高順德,鄭亞輝;200噸履帶起重機履帶架結構設計與有限元分析[J];機械設計與制造;2004年01期

6 楊春海;;煤礦重型掘進機履帶式行走機構的設計[J];煤礦機械;2011年02期

7 李洪亮;榮清白;田野;;掘進機行走部驅動力計算方法及關鍵部件的設計分析[J];煤礦機械;2012年02期

8 王曉波;鐘朝廷;趙宏林;張宏;曾鳴;;淺水鋪管船錨機主要部件的設計分析[J];石油礦場機械;2010年05期

9 孫晶晶;劉培林;段夢蘭;張九菊;胡顯偉;桂津;;深水臍帶纜安裝技術發展現狀與趨勢[J];石油礦場機械;2011年12期

10 孫亮;張仕民;林立;張宏;李志剛;王曉波;;海洋鋪管船用張緊器的總體設計[J];石油機械;2008年08期

本文編號：1937023