本文選題：核磁共振　切入點：測井信號處理軟件　出處：《電子科技大學》2014年碩士論文

【摘要】：MRIL-P型核磁是世界上最先進的核磁共振測井儀器之一,國外公司把MRIL-P型核磁測井資料處理技術視為核心機密加以保密。本論文研究成果為獨立研究,具有完全自主知識產權。主要研究?jī)?nèi)容和成果有:1.形成了MRIL-P型核磁回波生成技術,針對標準測井模式、差譜測井模式、移譜測井模式和綜合測井模式的數據進行回波生成技術研究,形成了亂序校正、旋轉疊加、相位校正等計算方法。最終回波生成計算結果與國外MRIL-P型核磁專用處理軟件(DPP軟件)結果完全一致。2.在前人研究基礎之上,通過構建核磁共振測井原始回波串,然后形成加入不同信噪比(SNR)的噪聲進行T2解譜。最后對比分析研究,形成了MRIL-P型核磁T2解譜改進奇異值分解算法;當SNR25時,無論是單峰形態還是雙峰形態的T2譜,解得的T2譜的與原始構造的T2譜幅度、形態都具有很好的一致性。3.在計算的偽毛管壓力基礎上,完成了平均孔喉半徑、孔隙喉道均值等參數的計算方法研究,為核磁共振測井解釋評價提供了重要的參數。總之,通過本論文的研究達到了以下幾個方面的目的:其一是掌握了MRIL-P核磁共振測井信號處理相關技術,開發出了磁共振測井信號處理分析軟件。其二是,針對川渝地區的地質特征,進行屬地化的應用軟件模塊的研發,在孔隙結構參數反演、孔隙流體孔隙度反演方面形成了特殊技術。其三是助推核磁共振測井儀器應用推廣,為公司創造了經濟效益。
[Abstract]:MRIL-P type nuclear magnetic field is one of the most advanced nuclear magnetic resonance logging tools in the world. The processing technology of MRIL-P type nuclear magnetic logging data is regarded as a core secret in foreign companies. Having completely independent intellectual property rights. The main research contents and achievements are: 1.The MRIL-P type nuclear magnetic echo generation technology is formed, aiming at standard logging model, differential spectrum logging model, The echo generation technology of the data of the shift spectrum logging model and the integrated logging model is studied, resulting in the correction of disorder sequence, rotation stacking, Phase correction and other calculation methods. The result of the final echo generation is completely consistent with that of MRIL-P nuclear magnetic processing software. 2. On the basis of previous studies, the original echo string of nuclear magnetic resonance logging is constructed. Then the noise with different signal-to-noise ratio (SNR) is formed for T2 spectrum analysis. Finally, the improved singular value decomposition algorithm of MRIL-P type NMR T2 spectrum is formed. When SNR25, both single-peak and bimodal T _ 2 spectra are obtained. The obtained T2 spectrum has a good agreement with the original structure in terms of amplitude and shape. On the basis of the calculated pseudo-capillary pressure, the calculation method of the mean pore throat radius, the mean pore throat and other parameters has been studied. It provides important parameters for nuclear magnetic resonance logging interpretation and evaluation. In a word, through the research of this paper, the following aspects have been achieved: first, we have mastered the MRIL-P nuclear magnetic resonance logging signal processing technology. A magnetic resonance logging signal processing and analysis software has been developed. Secondly, according to the geological characteristics of Sichuan and Chongqing areas, the development of localization application software module has been carried out, and the inversion of pore structure parameters has been carried out. A special technique for pore fluid porosity inversion has been formed. Thirdly, the application of nuclear magnetic resonance logging tools has been promoted, which has created economic benefits for the company.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：P631.8;TP311.52

【參考文獻】

相關期刊論文 前1條

1 肖忠祥;肖亮;;基于核磁共振測井和毛管壓力的儲層滲透率計算方法[J];原子能科學技術;2008年10期

，

本文編號：1677299