發布時間：2018-01-25 23:25

  本文關鍵詞： TD-SCDMA 數據鏈路層 RLC Femtocell　出處：《華南理工大學》2013年碩士論文　論文類型：學位論文

【摘要】：TD-SCDMA是第三代移動通訊系統的三大通訊制式之一,是中國擁有自主知識產權的3G標準。雖然該標準制定較晚,然而卻用有大量的技術后發優勢。在國家的大力支持推動下,TD-SCDMA由國內最大的通信運營商中國移動運營推廣,具有十分巨大的發展?jié)摿?也受到國內外眾多研究人員、通訊設備公司的密切關注。目前,國內的第三代通訊大規模商用已經成熟,各大城市也已經實現大面積網絡覆蓋。然而,隨著用戶增長,在用戶密集型的室內場所,可能會出現覆蓋質量無法滿足用戶需求的情況。Femto是使用于室內的小型基站系統,擁有結構簡單、部署方便等優勢,被認為是解決室內信號覆蓋難題的優秀解決方案。講Femto技術應用到當前的TD-SCDMA網絡,是當下的熱點問題。 本文整個課題依附于合作公司的TD-SCDMA家庭級Femto基站上層協議軟件實現項目,屬于實際工程應用研究的一部分。通過對數據鏈路層的整體架構設計和RLC子系統軟件實現兩方面的工作,對TD-SCDMA通信制式進行更加深入的研究。本課題需要對TD-SCDMA空中接口的高層協議進行分析,了解其中業務層的資源控制(RRC)模塊,數據鏈路層的整體架構設計及實現,和與物理適配層的接口參數等等內容。在后期工作中,我們根據協議的規定和實際需求的篩選,實現了RLC子系統的協議棧軟件,是整個課題的重點所在。 本篇論文對TD-SCDMA家庭級Femto的數據鏈路層整體進行了架構設計分析,并且完成了對RLC子系統的軟件開發,測試聯調等工作。其中包括確立RLC子系統的需求,研究開發RLC子系統三種模式的基本傳輸與控制功能,與上下層接口的數據結構體設計,配置參數意義的確立等等工作內容。另外,項目人員權衡了實現難度與實際需求,放棄了部分功能的實現(如數據加密解密),簡化了協議。經過測試,完成后的RLC子系統軟件三種模式的數據傳輸及控制功能已經完全滿足實際需求,在后續的聯調中也實現了所有預定功能,達到了課題研究的預定目的。
[Abstract]:TD-SCDMA is one of the three major communication systems of the third generation mobile communication system, which is the 3G standard of China with independent intellectual property rights. However, with a large number of technological advantages, TD-SCDMA is promoted by China Mobile, the largest telecommunications operator in China, and has great potential for development. At present, the domestic third generation communication large-scale commercial has matured, each big city has already realized the massive area network coverage. As users grow, in user-intensive indoor locations, coverage quality may not meet the user's needs. Femto is a small indoor base station system, with a simple structure. The advantage of easy deployment is considered as an excellent solution to the problem of indoor signal coverage. The application of Femto technology to the current TD-SCDMA network is a hot issue at present. The whole subject of this paper is attached to the TD-SCDMA family level Femto base station upper layer protocol software implementation project. Part of the practical engineering application research. Through the data link layer of the overall architecture design and RLC subsystem software implementation two aspects of the work. The TD-SCDMA communication system is studied more deeply. This topic needs to analyze the high-level protocol of TD-SCDMA air interface. Understand the RRC module of the business layer, the overall architecture design and implementation of the data link layer, and interface parameters with the physical adaptation layer. According to the rules of the protocol and the selection of the actual requirements, we have realized the protocol stack software of the RLC subsystem, which is the focus of the whole project. In this paper, the architecture of the data link layer of TD-SCDMA family level Femto is analyzed, and the software development of RLC subsystem is completed. It includes establishing the requirement of RLC subsystem, researching and developing the basic transmission and control function of three modes of RLC subsystem, and designing the data structure of interface with the upper and lower layers. In addition, the project personnel weigh the difficulty of implementation with the actual requirements, give up the implementation of some functions (such as data encryption and decryption, simplify the protocol. After testing. The data transmission and control functions of the three models of the RLC subsystem software have been fully satisfied with the actual requirements, and all the predefined functions have been realized in the subsequent joint adjustment, which has achieved the predefined purpose of the research on the subject.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TN929.5

【參考文獻】

相關期刊論文 前8條

1 趙國會;李貴勇;;LTE協議棧RLC層數據重傳的研究[J];電視技術;2011年01期

2 郭經紅;第三代數字移動通信系統及其比較[J];電子技術;2000年05期

3 徐泓,王京;WCDMA空中接口RLC層的AM傳輸方式關鍵技術的研究[J];高技術通訊;2002年05期

4 高紅偉;朱長安;陳明;;WCDMA系統中RLC層的參數配置與性能分析[J];廣東通信技術;2006年12期

5 楊星宇;李小文;謝偉;;LTE協議棧RLC層ARQ機制的研究及分析[J];廣東通信技術;2010年04期

6 卡哈里夫·梅耶遜;陸金周;;Femtocell：室內3G覆蓋解決之道[J];華東科技;2008年02期

7 楊運年;TD-SCDMA系統所采用的主要技術[J];數據通信;2003年03期

8 林曉艷;啜鋼;;TD-SCDMA系統中RLC層參數配置與性能分析[J];數字通信世界;2006年05期

，

本文編號：1463992