發布時間：2018-05-03 09:04

  本文選題：X射線熒光光譜法 + 橡膠鞋底　； 參考：《紅外與激光工程》2017年10期

【摘要】：建立一種簡便快速、靈敏準確、無損的檢驗橡膠鞋底物證的分析方法,為偵查破案提供線索、指明方向,為證實犯罪提供科學的依據。利用能量色散型X射線熒光光譜儀,電壓為45 k V,電流為40μA,功率為1.8 k W,樣品量為1.5 cm×1.5 cm,測試時間60 s。對不同品牌、不同種類的40個橡膠鞋底樣品中的無機元素進行定性和半定量分析,并考查了該方法的重現性。依據樣品中所含元素的種類及含量的不同,可以對不同品牌、同一品牌不同種類的橡膠鞋底樣品進行區分。同時,利用SPSS聚類分析-重心法作為類間定義距離,對橡膠鞋底樣品進行分類,樣品的聚類效果很好。試驗結果表明:利用該方法檢驗橡膠鞋底樣品簡便快速、結果準確可靠、重現性好、無需制樣且無損檢材,可用于公安機關實際辦案。
[Abstract]:To establish a simple, rapid, sensitive, accurate and non-destructive analysis method for testing rubber sole material evidence, to provide clues for investigating and solving cases, to point out the direction, and to provide scientific basis for the proof of crime. The energy dispersive X-ray fluorescence spectrometer is used, the voltage is 45 kV, the current is 40 渭 A, the power is 1.8 kW, the sample quantity is 1.5 cm 脳 1.5 cm, the test time is 60 s. Qualitative and semi-quantitative analysis of inorganic elements in 40 rubber sole samples of different brands and different types were carried out, and the reproducibility of the method was examined. According to the different types and contents of the elements contained in the samples, different brands and different kinds of rubber sole samples can be distinguished. At the same time, the rubber sole samples were classified by SPSS clustering analysis-barycenter method as the distance between the clusters, and the clustering effect of the samples was very good. The test results show that the method is simple and rapid, accurate and reliable, good reproducibility, no need of sample preparation and nondestructive testing, and can be used in practical cases of public security organs.
【作者單位】： 中國人民公安大學刑事科學技術學院;廣州市公安局白云區分局;北京市公安局豐臺分局刑偵支隊;天津市公安刑事偵查局;北京華儀宏盛技術有限公司;
【分類號】：D918.9;O657.34
，

本文編號：1837880