本文選題：調制傳輸函數(MTF) + 狹縫法　； 參考：《核電子學與探測技術》2015年08期

【摘要】：X射線探測器的調制傳輸函數(MTF)可以有效反映X射線攝影系統的成像質量,是客觀評價X射線成像系統性能的一個重要方法。實驗采用一個縫寬為10μm的狹縫相機和一個微焦斑X射線源,搭建測量平板探測器MTF曲線的平臺。通過探測器采集X射線穿透狹縫的成像數據,運用MATLAB編程對狹縫圖像進行線擴展函數(line spread function,LSF)的合成、高斯擬合、去噪、傅立葉變換和歸一化等處理,得到探測器的MTF曲線,再利用MTF曲線定量分析探測器的成像性能。通過探測器采集不同的X射線源電壓、發射功率、狹縫傾角及曝光時間下的數據,比較它們對探測器MTF測量結果的影響。
[Abstract]:The modulation transfer function (MTF) of X-ray detector can effectively reflect the imaging quality of X-ray imaging system. It is an important method to objectively evaluate the performance of X-ray imaging system. In the experiment, a slit camera with a slit width of 10 渭 m and a micro-focal spot X-ray source are used to build a platform for measuring the MTF curve of a flat detector. The imaging data of X-ray penetrating slit are collected by the detector. The linear extension function (line spread function is synthesized, Gao Si fitting, denoising, Fourier transform and normalization are processed to obtain the MTF curve of the detector. Then the imaging performance of the detector is quantitatively analyzed by MTF curve. The data of different X-ray source voltage, emission power, slit dip angle and exposure time were collected by the detector, and their effects on the measurement results of the detector MTF were compared.
【作者單位】： 南華大學電氣工程學院;中國科學院深圳先進技術研究院;
【基金】：國家科技支撐計劃項目(2012BAI13B04)資助
【分類號】：R812
，

本文編號：2079124