【摘要】：以聚乙烯吡咯烷酮(PVP K30)為載體,利用噴霧干燥法制備染料木素(1)的固體分散體。采用X射線粉末衍射(XRPD)、差示掃描量熱分析(DSC)和激光粒度分析(LD-PSD)對制品進行表征。結果表明,1在固體分散體中均以無定形或分子狀態存在。所制備的1-PVP K30(1∶5,w/w)固體分散體平均粒徑為(8.9±1.1)?m,在pH 6.8緩沖液中不但可顯著提高1的溶解度至8.37 mg/ml,而且可使1在2 h內完全溶出;此外,在25℃/相對濕度60%條件下放置2個月,物理和化學穩定性較好。
[Abstract]:Using polyvinylpyrrolidone (PVP K30) as carrier, the solid dispersion of genistein (1) was prepared by spray drying method. X-ray powder diffraction (XRD) (XRPD), differential scanning calorimetry (DSC) and laser particle size analysis (LD-PSD) were used to characterize the product. The results show that 1 exists in amorphous or molecular state in solid dispersion. The prepared 1-PVP K30 (1: 5 W / w) solid dispersion has an average particle size of (8.9 鹵1.1)? m.The solubility of 1 in pH 6.8 buffer solution can be significantly increased to 8.37 mg/ml, and 1 can be completely dissolved in 2 h. In addition, at 25 鈩，

本文編號：2286330