發布時間：2018-09-19 15:54

【摘要】：目的:考察低密度聚乙烯藥用滴眼劑瓶塑料摻雜情況,并分析其回收料與新料的差異。方法:采用差示掃描量熱法(DSC)分析8家廠家的滴眼劑瓶與原粒料的熔點值,并比較新料與一次料、三次料、六次料的熔融曲線、氧化誘導溫度以及氧化誘導時間。結果:差示掃描量熱法可以對低密度聚乙烯材質進行鑒別,并區分新料與回收料。結論:差示掃描量熱法在考察原料和產品材質一致性上可以提供一定的依據。
[Abstract]:Objective: to investigate the plastic doping of low density polyethylene (LDPE) medical eye drops and analyze the difference between the recovered and new materials. Methods: the melting point values of eye drops bottles and raw pellets from 8 factories were analyzed by differential scanning calorimetry (DSC). The melting curves of new and primary, tertiary and six-order materials, the temperature of oxidation induction and the time of oxidation induction were compared. Results: differential scanning calorimetry can be used to identify low density polyethylene (LDPE) materials and distinguish new materials from recycled materials. Conclusion: differential scanning calorimetry can be used to investigate the consistency of raw materials and products.
【作者單位】： 湖北省食品藥品監督檢驗研究院;
【分類號】：R927
，

本文編號：2250586