3-D打印個性化外固定器在嚴重脛腓骨骨折的初步應用
發布時間：2019-02-14 07:38
【摘要】：目的采用3-D打印技術制造個性化復位型外固定器,探討嚴重脛腓骨粉碎性骨折的治療新方法。方法 2015年4月選擇1例脛腓骨嚴重粉碎性骨折患者納入研究�；颊邽槟行�,年齡18歲,身高171 cm,體質量67 kg。采用計算機輔助技術與3-D打印技術相結合,定制個性化外固定支架對其進行治療,術后觀察臨床療效。結果支架安裝時間約10 min,術中無需透視,復位一次成功。術后雙下肢恢復等長;復查X線片示遠折端向后成角糾正了37°、外翻成角糾正了4°,脛骨骨折端對位對線良好,下肢力線完全矯正,與軟件模擬復位后模型一致。術后未出現新的骨折移位,3.5個月后骨折臨床愈合,8個月后達堅強骨性愈合;膝關節活動功能良好。結論應用3-D打印個性化外固定器治療脛腓骨嚴重粉碎性骨折,具有操作方便、個性化程度高、復位效果好、固定牢靠、復位無需X線透視等優點。
[Abstract]:Objective to study the treatment of severe comminuted tibia and fibula fracture by using 3-D printing technique to make personalized reduction external fixator. Methods A case of severe comminuted tibia and fibula fracture was selected in April 2015. The patient was male, aged 18 years, and 67 kg. tall with a body weight of 171 cm,. Combined with computer aided technique and 3-D printing technique, individualized external fixator was used to treat it, and the clinical effect was observed after operation. Results the stent installation time was about 10 min, without fluoroscopy, and the reduction was successful. After operation, the recovery of both lower limbs was equal length, the X ray film showed that the distal fold end was corrected by 37 擄, the extraversion angle was corrected by 4 擄, the tibial fracture end was well aligned, and the lower extremity force line was completely corrected, which was consistent with the model after software simulation reduction. There was no new fracture displacement after operation, the fracture healed after 3.5 months, and reached strong bone healing after 8 months, and the knee joint movement function was good. Conclusion the treatment of severe comminuted fracture of tibia and fibula with 3-D printing individualized external fixator has the advantages of convenient operation, high degree of individuation, good effect of reduction, firm fixation, and no need of X-ray fluoroscopy in the reduction of tibia and fibula.
【作者單位】： 廣州軍區廣州總醫院骨病關節科;廣州中醫藥大學研究生院;華南協同創新研究院;
【分類號】：R687.3
[Abstract]:Objective to study the treatment of severe comminuted tibia and fibula fracture by using 3-D printing technique to make personalized reduction external fixator. Methods A case of severe comminuted tibia and fibula fracture was selected in April 2015. The patient was male, aged 18 years, and 67 kg. tall with a body weight of 171 cm,. Combined with computer aided technique and 3-D printing technique, individualized external fixator was used to treat it, and the clinical effect was observed after operation. Results the stent installation time was about 10 min, without fluoroscopy, and the reduction was successful. After operation, the recovery of both lower limbs was equal length, the X ray film showed that the distal fold end was corrected by 37 擄, the extraversion angle was corrected by 4 擄, the tibial fracture end was well aligned, and the lower extremity force line was completely corrected, which was consistent with the model after software simulation reduction. There was no new fracture displacement after operation, the fracture healed after 3.5 months, and reached strong bone healing after 8 months, and the knee joint movement function was good. Conclusion the treatment of severe comminuted fracture of tibia and fibula with 3-D printing individualized external fixator has the advantages of convenient operation, high degree of individuation, good effect of reduction, firm fixation, and no need of X-ray fluoroscopy in the reduction of tibia and fibula.
【作者單位】： 廣州軍區廣州總醫院骨病關節科;廣州中醫藥大學研究生院;華南協同創新研究院;
【分類號】：R687.3
【共引文獻】
相關期刊論文 前1條
1 yぬ旌，
本文編號：2421985
本文鏈接：http://sikaile.net/yixuelunwen/waikelunwen/2421985.html
最近更新
教材專著
