【摘要】：針對嬰兒培養箱無線檢測數據沖突及能耗問題,提出一種ZigBee異周期數據傳輸方法。通過分析嬰兒培養箱無線檢測系統的網絡拓?fù)浣Y(jié)構特點,將ZigBee各終端節點的數據傳輸周期分配不同的數據傳輸參數并定期交替改變,減少多個終端節點向協調器隨機發送數據產生沖突,進而減少無線數據傳輸沖突降低能耗。建立并推導異周期傳輸方法的數據傳輸周期參數方程,給出數據傳輸方法的設計實例和嬰兒培養箱無線檢測系統的軟硬件設計及終端節點能耗測試,實現嬰兒培養箱溫、濕度等參數檢測,在實際使用中驗證該方法及檢測系統可行。
[Abstract]:In order to solve the problems of wireless detection data conflict and energy consumption in baby incubator, a ZigBee heterogeneous data transmission method is proposed. By analyzing the network topology characteristics of the baby incubator wireless detection system, the data transmission cycle of each terminal node of ZigBee is assigned to different data transmission parameters and changed alternately periodically. Reduce the conflict of random data sent by multiple terminal nodes to the coordinator, and then reduce the conflict of wireless data transmission and reduce the energy consumption. The data transmission cycle parameter equation of the different period transmission method is established and derived. the design example of the data transmission method and the hardware and software design of the wireless detection system of the baby incubator and the energy consumption test of the terminal node are given to realize the temperature of the baby incubator. Humidity and other parameters detection, in practical use to verify the feasibility of the method and detection system.
【作者單位】： 廣東省計量科學研究院;
【基金】：廣東省質監局科技項目(2015CJ01)
【分類號】：R197.39;TN92

【相似文獻】

相關期刊論文 前7條

1 侯永剛,韓孝軍;FANUC-18M和計算機的數據傳輸方法[J];機床電器;2005年03期

2 趙全錦,鄧文明;一種FANUC-0i和PC機的數據傳輸方法[J];制造技術與機床;2003年05期

3 鄧文明,趙全錦;FANUC-0i和PC機的數據傳輸方法[J];機械工人.冷加工;2003年04期

4 何懋渝;吳言蓀;張娜;;GPRS無線數據傳輸方法的研究[J];電網技術;2006年S1期

5 汪彬,劉華;NUM1000系列和PC機的數據傳輸方法[J];機械工人.冷加工;2004年08期

6 趙峰;;FANUC Series 0i-MC操作系統與PC機的數據傳輸方法[J];金屬加工(冷加工);2012年04期

7 ;[J];;年期

相關會議論文 前1條

1 潘海斌;顧亞平;;水聲傳輸中的數據傳輸方法研究[A];2008年全國聲學學術會議論文集[C];2008年

，

本文編號：2475630