【摘要】：以元素粉末為原料,采用機械合金化方法結合放電等離子燒結工藝制備了Ti-8Mo-(0~9)Fe合金材料,并探討了制備工藝對球磨粉體及燒結態合金性能的影響規律。結果表明,當鐵含量為3%~9%(質量分?jǐn)?shù))時,球磨10 h粉體經900℃燒結可獲得高致密度、并具有超細晶結構的鈦合金材料,其顯微組織主要由β-Ti相基體及fcc-Ti顆粒組成,其晶粒尺寸為130~490 nm,這是在鈦合金塊體材料中首次制備出fcc結構Ti相。在機械合金化過程中,Fe元素的加入可顯著提高合金體系的非晶形成能力,并隨Fe含量增加體系非晶形成能力增強,粉末非晶相比例增加,經10 h高能球磨后,即可合成具有良好的熱穩定性的非晶/納米晶Ti-Mo-Fe復合粉末。
[Abstract]:Ti-8Mo- _ (0 / 9) Fe alloy material was prepared by mechanical alloying and spark plasma sintering with elemental powder as raw material. The influence of preparation process on the properties of ball-milled powder and sintered alloy was discussed. The results show that when the content of iron is 3% and 9% (mass fraction), the titanium alloy with ultra-fine grain structure can be obtained by sintering at 900 鈩，

本文編號：2432804