本文選題：D生物打印 + 組織工程��； 參考：《航天醫學與醫學工程》2016年06期

【摘要】：具備個性化、精準化的3D生物打印技術構建優良生物相容性的組織工程支架,替換或修復人體中病變的組織和/或器官,在組織工程研究中極具廣泛的應用前景。而作為3D打印技術的基材,如金屬、生物陶瓷、高分子材料和細胞生物材料等,也因此得到了研究者的重視和研發。由金屬和生物陶瓷制備的支架具有高強度和耐腐蝕性,已在骨科中得到廣泛應用,而高分子材料由于其和細胞/組織的良好生物相容性及可塑性使其在軟骨、矯形外科、心血管系統等組織/器官中被廣泛研究。相信在不久的將來,以上述材料為基材結合3D生物打印技術構建的組織和器官,在臨床上會得到應用和推廣。本文就用于3D打印的生物材料及其打印技術在組織工程支架構建及組織再生中的應用進行綜述。
[Abstract]:Tissue engineering scaffolds with good biocompatibility can be constructed with personalized and accurate 3D biprint technology to replace or repair the diseased tissues and / or organs in human body. It has a wide application prospect in tissue engineering research. As the substrate of 3D printing technology, such as metal, bioceramics, polymer materials and cellular biomaterials, researchers also pay attention to and research. Scaffolds made of metal and bioceramics have been widely used in orthopaedics because of their high strength and corrosion resistance, while polymer materials are widely used in cartilage and orthopedic surgery because of their good biocompatibility and plasticity with cells / tissues. The cardiovascular system and other tissues / organs are widely studied. It is believed that in the near future, the tissue and organs based on the above materials and 3D biologic printing technology will be applied and popularized in clinic. This paper reviews the application of biomaterials and printing technology in tissue engineering scaffold construction and tissue regeneration.
【作者單位】： 寧波大學醫學院;寧波大學醫學院附屬第六醫院;
【分類號】：R318.6

【相似文獻】

相關會議論文 前10條

1 趙靜一;李侃;吳厚正;張曉華;;組織工程支架內流場的數值模擬[A];第四屆全國流體傳動與控制學術會議論文集[C];2006年

2 劉厚利;王連才;馮增國;;旋轉成型/粒子浸出法制備管狀組織工程支架[A];中國生物醫學工程學會第六次會員代表大會暨學術會議論文摘要匯編[C];2004年

3 宋建康;唐愛民;;纖維素納米纖維及其組織工程支架的制備[A];中國化學會第28屆學術年會第4分會場摘要集[C];2012年

4 陳楚;譚慶剛;任杰;;“鹽熔法”制備組織工程支架的研究[A];2007年上海市醫用生物材料研討會論文匯編[C];2007年

5 譚周;劉煉;楊t，

本文編號：2037788