親水潤滑涂料的制備及在醫用聚氨酯導管中的應用
發布時間:2018-04-14 10:09
本文選題:聚氨酯導管 + 親水潤滑涂料; 參考:《應用化工》2017年05期
【摘要】:采用含碳碳雙鍵的二苯甲酮類光引發劑與乙烯基吡咯烷酮反應,合成具有光引發活性的二苯甲酮-乙烯基吡咯烷酮低聚物(ABP-PVP),用于制備親水潤滑涂料,涂覆于醫用聚氨酯導管表面,經紫外光固化后,進行摩擦系數、接觸角、附著力等測試。結果表明,在5 N的壓力作用下,聚氨酯導管表面摩擦系數由改性前的1.00減小到0.07,與水的接觸角由改性前的86.3°降為18.7°,潤滑性和親水性顯著提高,附著牢度達到100%,并具有良好的生物安全性。
[Abstract]:The photoinitiator containing carbon-carbon double bond benzophenone reacted with vinyl pyrrolidone to synthesize benzophenone-vinyl pyrrolidone oligomer (ABP-PVP) with photoinitiator, which was used to prepare hydrophilic lubricating coating.After UV curing, friction coefficient, contact angle and adhesion were measured.The results show that under the pressure of 5 N, the surface friction coefficient of polyurethane pipe decreases from 1.00 before modification to 0.07, and the contact angle with water decreases from 86.3 擄to 18.7 擄. The lubricity and hydrophilicity of polyurethane pipe are improved significantly.The fastness is 100 and has good biological safety.
【作者單位】: 中山大學化學學院廣東省環保功能油墨工程技術研究中心;
【基金】:廣東省科技廳科技計劃項目(2014A010105024)
【分類號】:R318.08;TQ630.1
,
本文編號:1748835
本文鏈接:http://sikaile.net/yixuelunwen/swyx/1748835.html
最近更新
教材專著