仿生構建殼聚糖三維有序多孔支架
本文關鍵詞: 定向沉積法 殼聚糖 四氧化三鐵 電場 絲瓜筋 蜂窩 出處:《浙江工業大學》2012年碩士論文 論文類型:學位論文
【摘要】:本論文是針對殼聚糖制備骨修復多孔支架三維結構構筑困難,,力學性能差等問題,采用了仿生的方法構筑支架結構并研究其力學性能。得到如下結果: (1)受絲瓜筋結構啟發,首次將電場引入殼聚糖多孔骨修復支架材料的制備,即通過對電極材料、溶液濃度的優化,采用定向沉積法制備新型多孔支架。經掃描電子顯微鏡(SEM)觀察,發現所制備支架具有仿絲瓜筋結構。力學性能測試發現,當孔隙率為84%時,支架的抗壓強度可高達0.73Mpa。通過改變電壓可以調控支架的結構與性能。 (2)經仿生設計,以殼聚糖和四氧化三鐵前驅液為原料,采用殼聚糖定向沉積法制備了具有仿蜂窩結構的殼聚糖/四氧化三鐵復合多孔支架。XRD測試表明,四氧化三鐵前驅液在殼聚糖的定向沉積中生成了四氧化三鐵,并與殼聚糖具有良好的化學鍵合。SEM觀察顯示,在四氧化三鐵含量為20wt%時,形成了完整的呈蜂窩狀結構的多孔復合支架,直徑約0.48μm,長約2μm的柱狀磁性粒子均勻地分布在殼聚糖基體中。所得的殼聚糖/四氧化三鐵復合多孔支架在孔隙率高達93%時抗壓強度可達0.436MPa。
[Abstract]:In order to solve the problems of difficult construction and poor mechanical properties of the porous scaffold prepared by chitosan, the bionic method was used to construct the scaffold structure and study its mechanical properties. The results are as follows:. 1) inspired by the structure of loofah tendon, the electric field was introduced into the preparation of chitosan porous bone repair scaffold for the first time, that is, by optimizing the electrode material and solution concentration, A new porous scaffold was prepared by directional deposition. Observed by scanning electron microscope (SEM), it was found that the scaffold had a fascia imitation structure. The mechanical properties test showed that when the porosity was 84, The compressive strength of the support can be up to 0.73 Mpa. the structure and performance of the support can be regulated by changing the voltage. By bionic design, chitosan / Fe _ 2O _ 3 composite porous scaffold with similar honeycomb structure was prepared by using chitosan and Fe _ 2O _ 4 precursor as raw materials. Fe _ 2O _ 3 precursor produced Fe _ 2O _ 4 in the directional deposition of chitosan. The results of chemical bonding with chitosan showed that the content of Fe _ 2O _ 3 was 20 wt%. Forming a complete porous composite scaffold with a honeycomb structure, The columnar magnetic particles of about 0.48 渭 m in diameter and about 2 渭 m in length were uniformly distributed in the chitosan matrix, and the compressive strength of the porous scaffolds with chitosan / iron trioxide composite was 0.436 MPA when the porosity was up to 93 渭 m.
【學位授予單位】:浙江工業大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:R318.08
【參考文獻】
中國期刊全文數據庫 前10條
1 張文毓;;新型仿生材料的研究進展[J];傳感器世界;2009年06期
2 王玉慶 ,周本濂 ,師昌緒;仿生材料學——一門新型的交叉學科[J];材料導報;1995年04期
3 田杰謨;董利民;王晨;王賢剛;昝青峰;張朝宗;郭志平;盧世璧;彭江;汪愛媛;孫明學;;組織工程化三維仿骨支架重建股骨頭壞死區研究[J];稀有金屬材料與工程;2009年S2期
4 鐘昭明;磁性材料家族的新成員——高分子有機磁性材料[J];磁性材料及器件;1999年06期
5 胡巧玲,李曉東,沈家驄;仿生結構材料的研究進展[J];材料研究學報;2003年04期
6 張學驁;劉長利;王建方;吳文健;;仿珍珠層自組裝制備有機/無機納米復合薄膜[J];復合材料學報;2006年04期
7 楊志賢;戴振東;;甲蟲生物材料的仿生研究進展[J];復合材料學報;2008年02期
8 李保強,胡巧玲,錢秀珍,方征平,沈家驄;原位沉析法制備可吸收殼聚糖/羥基磷灰石棒材[J];高分子學報;2002年06期
9 王延梅,封麟先;磁性高分子微球的研究進展[J];高分子材料科學與工程;1998年05期
10 趙營剛;王迎軍;盧玲;陳曉峰;吳剛;;仿生型殼聚糖-明膠/溶膠凝膠生物玻璃復合支架的制備及其礦化性能研究[J];硅酸鹽通報;2006年02期
中國博士學位論文全文數據庫 前1條
1 洪奕;可注射性聚乳酸細胞微載體/殼聚糖水凝膠復合支架的構建[D];浙江大學;2005年
中國碩士學位論文全文數據庫 前2條
1 蔡青;磁性高分子微球的制備與表征[D];四川大學;2007年
2 文德;磁性高分子微球的制備研究[D];四川大學;2007年
本文編號:1529574
本文鏈接:http://sikaile.net/yixuelunwen/swyx/1529574.html