新型藥用輔料乙交酯丙交酯共聚物中單體殘留量的測定
發布時間:2018-02-15 14:13
本文關鍵詞: 內標 氣相色譜法 PLGA 乙交酯 丙交酯 出處:《中國新藥雜志》2014年04期 論文類型:期刊論文
【摘要】:目的:建立內標法測定乙交酯丙交酯共聚物(PLGA)中單體殘留量的氣相色譜檢測方法。方法:采用氣相色譜法進行測定:內標物為乙酸丁酯;色譜柱為DB-5柱(30 m×0.53 mm,5μm);進樣口溫度為250℃;分流比10∶1;載氣為氮?dú)?柱溫為135℃;檢測器為火焰離子檢測器(FID),檢測器溫度為300℃;進樣量為3μL。結果:采用氣相色譜法測定PLGA中乙交酯與丙交酯的含量,乙交酯與丙交酯的線性范圍分別為17.67~83.30和33.33~266.70μg·mL-1,加標回收率分別為99.0%和100.6%,相對標準偏差分別為0.7%和1.0%。結論:經方法學驗證,該法簡便、快捷、靈敏度高、結果準確,適用于PLGA中乙交酯與丙交酯的檢測。
[Abstract]:Objective: to establish a gas chromatographic method for the determination of monomer residues in glycolide lactide copolymer (PLGA). Methods: the internal standard was determined by gas chromatography: butyl acetate was used as the internal standard. The chromatographic column consisted of DB-5 column (30m 脳 0.53mm-1), the injection temperature was 250 鈩,
本文編號:1513454
本文鏈接:http://sikaile.net/yixuelunwen/swyx/1513454.html
最近更新
教材專著