【摘要】：網絡控制系統是計算機網絡技術和控制理論融合的產物,它通過共享網絡信道把傳感器、控制器、執行器連接起來形成閉環控制系統,進而實現信息的傳輸和交換。網絡控制系統憑借著成本低、易維護、易拓展、靈活性高等優點廣泛應用于航空航天、工業控制、飛行器設計等領域,網絡控制系統已成為當前熱門研究方向。但是網絡的介入使得網絡控制系統不可避免的會遇到網絡誘導延遲、數據丟包、網絡帶寬的約束限制等問題。此外由于一些信號不易被編碼,需要引入量化器,不可避免的引入量化誤差的影響,這些問題都會導致控制性能的下降,因此對于網絡控制系統量化控制理論的研究就有著重要意義。本文考慮網絡誘導時延、數據丟包、量化、事件觸發機制等因素的影響,進行網絡控制系統量化反饋控制器設計與仿真研究。本文的主要工作內容如下:(1)考慮網絡誘導時延的影響,采用對數量化器分別對網絡控制系統的狀態信號和控制信號進行量化,將量化誤差的影響轉化為扇形界下的不確定性,進行量化控制器設計和H∞量化控制器設計。通過構造Lyapunov函數,應用線性矩陣不等式(LMI)方法得到系統漸進穩定并具有H∞性能指標γ的充分條件。最后,仿真驗證方法有效性。(2)考慮量化和網絡誘導時延對系統的影響,利用轉移概率部分未知的Markov鏈來描述數據丟包的隨機變化規律,將網絡控制系統建模成Markov跳變系統,進行量化控制器和H∞量化控制器的設計。通過構建Lyapunov-Krasovskii泛函,應用LMI方法得到系統隨機穩定且具有H∞性能指標γ的充分條件,并用錐補線性化算法對量化控制器進行求解。最后,仿真驗證方法有效性。(3)考慮網絡誘導時延和量化的影響情況下,研究了基于事件觸發機制的網絡控制系統量化控制問題。通過構造Lyapunov-Krasovskii泛函,應用LMI方法得到系統漸進穩定的充分條件,并用錐補線性化算法對量化控制器進行求解。最后,仿真驗證方法有效性。
[Abstract]:The networked control system is the product of the fusion of computer network technology and control theory. It connects sensors, controllers and actuators to form a closed-loop control system through shared network channels, and then realizes the transmission and exchange of information. With the advantages of low cost, easy maintenance, easy expansion and high flexibility, network control system has been widely used in aerospace, industrial control, aircraft design and other fields. Network control system has become a hot research direction. However, the network control system will inevitably encounter network induced delay, data packet loss, network bandwidth constraints and so on. In addition, because some signals are not easy to be coded, quantizer is needed, and the influence of quantization error is inevitable. These problems will lead to the deterioration of control performance. Therefore, it is of great significance to study the quantitative control theory of networked control system. Considering the influence of network induced delay, data packet loss, quantization and event trigger mechanism, the design and simulation of quantization feedback controller for networked control system are studied in this paper. The main work of this paper is as follows: (1) considering the influence of network-induced delay, quantizer is used to quantize the state signal and control signal of the networked control system. The influence of quantization error is transformed into the uncertainty under the sector bound, and the quantization controller and H 鈭，

本文編號：2296401