【摘要】：選擇性激光燒結(SLS)打印技術是一種先進的快速制造技術,國內外對金屬粉末SLS打印技術進行了研究,但國內相關研究相比國外還有一定差距。本課題對金屬SLS打印機結構以及成型質量影響因素進行了研究。以改進打印機結構、提高成型件質量為目標展開課題研究。對打印機總體結構進行設計,針對現有鋪粉裝置無法克服燒結過程中金屬粉末“球化飛濺”帶來的影響,對鋪粉裝置進行改進,在鋪粉輥表面增加一層硬質橡膠并在鋪粉輥前設置一個一定厚度的刮板。加工零件,組裝出實物樣機,分別使用改進前和改進后的鋪粉裝置在實物樣機上進行測試,結果表明改進后的裝置可緩解球化飛濺現象,對成型質量有提升作用。對測試樣件進行尺寸精度分析,實際尺寸與理論尺寸存在一定偏差,需要對成型質量影響因素進行研究以便進一步提升成型質量。分析幾何數據處理、粉末材料性質、成型工藝參數以及掃描方式對成型質量的影響,對各參數的選取提出建議。研究成型質量的評價問題,針對目前沒有能夠全面系統反映出成型件整體質量的測試件的現象,設計一種能夠較全面評價成型件整體成型質量的測試件,對制定合理的成型質量評價模型有一定參考作用,為全面系統地評價成型質量奠定基礎。針對國內外對金屬粉末三維燒結溫度場研究較少的現狀,以水霧化鐵粉作為研究對象,對金屬粉末的連續移動三維瞬態溫度場進行數值模擬,對結果進行分析,有利于掌握燒結過程中溫度場的動態分布情況,通過改變燒結參數分析影響成型質量的工藝因素,對實際的試驗做出理論指導并提供理論依據。綜上所述,本課題的開展為金屬SLS打印技術進一步研究奠定了一定理論與技術基礎。
[Abstract]:Selective laser sintering (SLS) (SLS) printing technology is an advanced rapid manufacturing technology. The metal powder SLS printing technology has been studied at home and abroad, but there is still a certain gap between domestic and foreign related research. In this paper, the structure of metal SLS printer and the influencing factors of forming quality are studied. In order to improve the printer structure, improve the quality of forming parts as the goal of the research. The overall structure of the printer is designed. In view of the fact that the existing powder laying device can not overcome the influence of "spheroidization spatter" of metal powder in the sintering process, the powder laying device is improved. Add a layer of hard rubber to the surface of the roller and set a thickness scraper in front of the roll. The parts are processed, the prototype is assembled, and the powder laying device is tested on the prototype before and after the improvement. The results show that the improved device can alleviate the spatter phenomenon of spheroidization and improve the molding quality. The dimension precision analysis of the test sample shows that there is a certain deviation between the actual size and the theoretical dimension, so it is necessary to study the influencing factors of the forming quality in order to further improve the forming quality. The influences of geometric data processing, properties of powder materials, forming process parameters and scanning mode on forming quality are analyzed, and some suggestions are put forward for the selection of each parameter. The evaluation of forming quality is studied. Aiming at the phenomenon that there is no comprehensive and systematic test part which can reflect the whole quality of forming part at present, a kind of testing piece which can evaluate the whole forming quality of forming part is designed, which can be used to evaluate the whole forming quality of forming part in a more comprehensive way. It can be used as a reference to establish a reasonable molding quality evaluation model and lay a foundation for the overall and systematic evaluation of molding quality. In view of the lack of research on three-dimensional sintering temperature field of metal powder at home and abroad, the three-dimensional transient temperature field of continuous movement of metal powder is numerically simulated and the results are analyzed by using water-fogged iron powder as the research object. It is beneficial to grasp the dynamic distribution of the temperature field in the sintering process. By changing the sintering parameters, the technological factors affecting the forming quality are analyzed, and the theoretical guidance and theoretical basis are provided for the practical test. In summary, the development of this topic for the further study of metal SLS printing technology laid a certain theoretical and technical basis.
【學位授予單位】：湖北工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TF37

【參考文獻】

相關期刊論文 前10條

1 宮玉璽;王慶順;朱麗娟;楊潔;;選擇性激光燒結成形設備及原材料的研究現狀[J];鑄造;2017年03期

2 張格;王建宏;張浩;;金屬粉末選區激光熔化球化現象研究[J];鑄造技術;2017年02期

3 馬旭東;;選擇性激光燒結在3D打印中的應用[J];工程技術研究;2016年07期

4 劉夢月;吳甲民;陳安南;陳曦;朱小剛;王聯鳳;史玉升;;激光選區燒結用SiC復合粉體制備及其成型特性研究[J];上海航天;2016年05期

5 姜樂濤;白培康;趙娜;劉宇琨;;覆膜Mo粉SLS成形件熔滲金屬工藝研究[J];特種鑄造及有色合金;2015年08期

6 劉錦輝;劉邦濤;謝雪冬;袁學兵;孟祥林;;高功率光纖激光熔化成形IN718的工藝及性能[J];航空材料學報;2015年04期

7 吳桐;劉邦濤;劉錦輝;;鎳基高溫合金選擇性激光熔化的工藝參數[J];黑龍江科技大學學報;2015年04期

8 姜樂濤;白培康;趙娜;劉宇琨;;覆膜鉬粉SLS成型件后處理實驗研究[J];熱加工工藝;2015年14期

9 張國全;顧冬冬;;選區激光熔化成形TiC固溶增強鎢基復合材料研究[J];稀有金屬材料與工程;2015年04期

10 史玉升;張李超;白宇;趙祖燁;;3D打印技術的發展及其軟件實現[J];中國科學:信息科學;2015年02期

相關會議論文 前1條

1 史玉升;黃樹槐;周祖德;陳健;;影響SLS成形件性能的主要因素分析[A];2001年中國機械工程學會年會暨第九屆全國特種加工學術年會論文集[C];2001年

相關碩士學位論文 前5條

1 李曉剛;選擇性激光燒結快速成型機鋪粉系統的研究[D];陜西科技大學;2015年

2 劉野;直接金屬SLS快速成型機的研究及其參數化設計[D];陜西科技大學;2013年

3 彭蓓;選擇性激光燒結加工仿真系統的研究與開發[D];華東交通大學;2009年

4 王文峰;覆膜金屬粉末激光燒結成型過程三維溫度場數值模擬技術研究[D];中北大學;2008年

5 陳寶慶;基于覆膜砂的選擇性激光燒結快速成型基礎實驗研究[D];大連理工大學;2005年

，

本文編號：2463959