本文關鍵詞：長春油田昌十區塊雙二段油藏特征及主力剩余油分布　出處：《吉林大學》2017年碩士論文　論文類型：學位論文

  更多相關文章： 雙二段 油藏描述 剩余油

【摘要】：長春油田昌十區塊位于鹿鄉斷陷五星構造帶的東北部,工區面積僅為0.5km2。雙陽組二段是該區塊的主要產油層位。本文結合工區三維地震數據體、二次解釋及物性參數資料,以勘查地球物理學、沉積學、石油地質學為理論支撐,運用landmark和雙狐軟件開展區塊內部微幅構造研究并分析油藏特征、成藏條件與剩余油的關系,再結合物性資料劃分流動單元。最后運用疊合分析的方法綜合考慮沉積微相、微幅構造類型及流動單元的劃分結果,預測了雙二段主力剩余油分布。具體內容如下:一、微幅構造的類型及分布利用landmark軟件完成工區內部33口井的地震合成記錄,并在此基礎上識別地震反射標志層及斷裂位置,制作砂組界面的構造等值線圖。最終識別出雙二段的56個正向微幅構造分布區,其中正向微幅構造包括微背斜、微鼻狀和微斷鼻3種。二、生儲蓋組合及成藏類型區內以下生上儲為主,其油源主要來自雙一段。大量的烴源巖為形成油藏提供了基礎,同時雙二段還發育了大量的河道砂體,該砂體物性較好可作為有利儲層。雙三段泥巖較厚且在全區均有分布,因此可形成穩定的區域蓋層。區內成藏類型較多,主要可劃分為構造油藏、巖性-構造油藏、巖性油藏三個大類,其中構造油藏可劃分為背斜構造油藏、斷鼻構造油藏、鼻狀構造油藏,巖性-構造油藏主要為砂巖透鏡體-構造油藏,巖性油藏可劃分為砂巖透鏡體油藏和砂體上傾尖滅油藏。三、流動單元?jiǎng)澐旨笆Ｓ嘤头植純?yōu)選在前人小層對比以及物性分析的基礎上,計算工區內36口井各成因砂體的物性參數并建立了滲流參數J的頻數-概率累計曲線,依據頻數-概率曲線分布圖上不同斜率的直線段將流動單元?jiǎng)澐殖蒍≤500、500J≤1500、1500J≤4000、J4000四類,并以沉積相和斷點為界制作了流動單元平面分布圖,再將流動單元平面圖與微幅構造相疊,最終優選出了剩余油分布區,該研究為制定挖潛措施提供了目標。
[Abstract]:Changchun oilfield Chang ten block is located in Lu Xiang Wuxing structural fault depression in the northeast area, the area is only 0.5km2. two segment of Shuangyang Formation is the main oil producing formation in the block area. Based on 3D seismic data interpretation, two physical parameters, in exploration geophysics, sedimentary, petroleum geology theory use block, internal micro structure research and analysis of reservoir characteristics of landmark and DoubleFox software, relationship between the reservoir condition and residual oil, combined with the physical data flow unit division. Finally, by using the method of superposition analysis considering the sedimentary microfacies, micro structure type and division of the flow unit, double two the main section of the residual oil distribution forecast. The specific contents are as follows: first, the synthetic seismogram and the use of landmark software to complete the distribution area of 33 wells within the micro structure of the type, and on the basis of the recognition of seismic reflection The sign layer and fracture location, structural contour map making sand interface. Finally recognize double two section of the 56 positive micro structure distribution, the positive micro structure including micro and micro micro nosing anticline, fault nose 3. Two, source reservoir cap combination and reservoir types in the area below formation, the oil source mainly comes from the first member. A large number of source rock provides the basis for the formation of reservoir, and double two also developed a large number of channel sand body, the sand body with better properties can be used as reservoirs. Three double thick and mudstone in the region are distributed, so it can be the formation of a stable regional caprock. Area reservoir can be divided into many types, the main structural reservoir, lithologic structural reservoir, lithologic reservoir in three categories, which can be divided into structural reservoir anticline reservoir, fault nose structural reservoir, nose structure reservoir, lithologic structural reservoir is mainly sandstone lens body structural oil Reservoir, lithologic reservoir can be divided into sandstone lens reservoir and sandstone pinchout reservoirs. Three, division of flow units and remaining oil distribution optimization based on the analysis of the previous layer correlation and physical property parameters on the calculation in the work area of 36 wells in the sand and set up the frequency of seepage. The number of J probability cumulative curve, according to the frequency - probability distribution curve diagram of different slope of the straight line segment flow unit is divided into J = 500500J = 15001500J = 4000, J4000 four, and the sedimentary facies and the breakpoint boundary made flow unit distribution map, and then flow unit plane map and micro structure overlapping finally, selected the remaining oil distribution area, this study provides a target for the development of measures.

【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TE327;P618.13

【相似文獻】

相關期刊論文 前10條

1 李師侖;;煤的二段液化新技術[J];煤炭科學技術;1982年11期

2 王柏林;季柏林;;硫酸尾氣增設第二段回收處理裝置獲得成功[J];化工環保;1992年02期

3 ;中氮尿素第二次生產技術經驗交流會紀要(附件之五) 提高尿素成品一級品率的若干措施(試行)[J];化肥設計;1982年S1期

4 iJ士春;;3ДР-54型毫秒差爆破器的串，

本文編號：1423688