【摘要】：目的:明確凝膠模板工藝過程中微粒粒徑大小和不同溶劑體系對甘草次酸微粒性質的影響。方法:采用新型凝膠模板法,分別利用不同孔徑模板和不同溶劑體系制備甘草次酸-PLGA微粒,掃描電鏡觀察其表面形態,測定載藥量及包封率,比較體外釋藥特征。結果:所得微粒呈微小圓柱體,粒徑均一、形態可控,載藥量較高,改變粒徑大小和溶劑體系可調節微粒體外釋放度。結論:凝膠模板法微粒制備技術可精確控制微粒粒徑和形態,適用溶劑廣泛,有利于緩釋微粒給藥系統的釋藥調節。
[Abstract]:Aim: to investigate the effect of particle size and solvent system on the properties of glycyrrhetinic acid particles in gel template process. Methods: a new gel template method was used to prepare glycyrrhetinic acid-PLGA particles using different pore size templates and different solvent systems respectively. The surface morphology of glycyrrhetinic acid (PLGA) particles were observed by scanning electron microscope (SEM). The drug loading and encapsulation efficiency were measured and the drug release characteristics in vitro were compared. Results: the particle size was uniform, the morphology was controlled, the drug loading was high, and the external release of microsomes could be adjusted by changing the particle size and solvent system. Conclusion: the gel template method can accurately control the particle size and morphology, is suitable for a wide range of solvents, and is beneficial to the drug release regulation of the drug delivery system.
【作者單位】： 寧夏醫科大學藥學院;青海民族大學藥學院;回醫藥現代化省部共建教育部重點實驗室;寧夏回藥現代化工程技術研究中心;
【基金】：國家自然科學基金(81360644) 寧夏回族自治區科技支撐國際合作項目(寧科計字[2013]21號)
【分類號】：R943

【相似文獻】

相關期刊論文 前1條

1 衛英;陸國椿;;納米微粒系統介導小干擾RNA體內遞送的研究進展[J];中國藥房;2013年09期

相關會議論文 前1條

1 王身國;;聚內酯類高分子微粒體的制備及其醫學應用[A];2005年全國高分子學術論文報告會論文摘要集[C];2005年

相關博士學位論文 前1條

1 宋欣榮;含芳環聚合物分散相微粒材料的合成、表征和電流變性能研究[D];湘潭大學;2005年

，

本文編號：2373008