【摘要】：引入了一種操作簡便的制備高固含量銀納米墨水的方法,以月桂酸作為保護劑,水合肼作為還原劑,一步發制備出粒徑均勻,尺寸為20nm,且固含量可達14%的銀導電墨水。分別探究了硝酸銀用量,水合肼含量等因素對產物形貌和固含量的影響。采用冷場發射掃描電子顯微鏡和紫外可見分光光度計對產物的形貌和尺寸分布進行了測試。最后,銀墨水經小于200℃的低溫?zé)Y(jié)后,獲得電阻最低為17mΩ/的銀薄膜層,為納米銀墨水在柔性電路中的應用奠定了基礎。
[Abstract]:A simple and convenient method for preparing silver nano-ink with high solid content was introduced. Silver conductive ink with uniform particle size of 20 nm and solid content of 14% was prepared in one step with lauric acid as protective agent and hydrazine hydrate as reducing agent. The effects of the amount of silver nitrate and the content of hydrazine hydrate on the morphology and solid content of the product were investigated. The morphology and size distribution of the products were measured by cold field emission scanning electron microscope and UV-Vis spectrophotometer. Finally, the silver film layer with the lowest resistance of 17m 惟 / was obtained after the silver ink was sintered at low temperature below 200 鈩，

本文編號：2221509