發布時間：2018-05-24 19:50

  本文選題：高壓均質法 + 枸櫞酸噴托維林��； 參考：《中國粉體技術》2016年02期

【摘要】：采用高壓均質法制備枸櫞酸噴托維林納米顆粒,分析均質壓力、均質次數和儲存過程對藥物顆粒形貌與粒徑的影響,通過噴霧干燥制得微粉。結果表明:最優高壓均質條件是均質壓力為75 MPa、循環5次,制得的納米顆粒是粒徑為100~200 nm的片狀結晶,儲存穩定;枸櫞酸噴托維林納米顆粒懸濁液噴霧干燥微粉顆粒呈粒徑小于1μm的球形,由保持原微觀形貌與結構的納米片狀結晶聚集而成。
[Abstract]:The high pressure homogenization method was used to prepare pteroverine citrate nanoparticles. The effects of homogenization pressure, homogenization times and storage process on the morphology and particle size of drug particles were analyzed. The powder was prepared by spray drying. The results show that the optimal high pressure homogenization conditions are as follows: homogenization pressure is 75 MPA, circulation is 5 times, the prepared nanoparticles are flake crystals with diameter of 100 ~ 200 nm and stable storage. Spray drying of aerosol powder particles from aerosol suspension of citric acid sprayed toverine nanoparticles was spherical in size less than 1 渭 m, and was formed by the aggregation of nanocrystalline crystals with the original morphology and structure.
【作者單位】： 防化研究院;
【基金】：國防預先研究項目
【分類號】：TB383.1;TQ460.1
，

本文編號：1930328