發布時間：2018-03-09 10:11

  本文選題：共結晶　切入點：共晶體　出處：《現代食品科技》2017年05期 　論文類型：期刊論文

【摘要】：共結晶技術是精細化學品、制藥等高附加值行業的前沿研究方向。本文以赤蘚糖醇為載體,采用熔融共結晶法制備了赤蘚糖醇-三氯蔗糖固態復配產品,應用TG-DSC、XRD和SEM等對其結構與性能進行了表征分析;結果表明:熔融共結晶法制備的赤蘚糖醇-三氯蔗糖固態復配產品為共晶體,赤蘚糖醇-三氯蔗糖共晶體的DSC熱分解吸熱峰的峰頂溫度為156.2℃,而三氯蔗糖的熱分解吸熱峰的峰頂溫度為134.4℃,說明共結晶過程有效提高了共晶體復配產品中三氯蔗糖的熱穩定性,共結晶試驗中發現晶種加入量和晶種粒度分布是影響赤蘚糖醇-三氯蔗糖共結晶產品粒度分布和堆密度的重要因素;當加入晶種的粒度為120~200目,加入量為10 wt%時,熔融共結晶法制備的赤蘚糖醇-三氯蔗糖共晶體產品中30~60目的晶體占總質量的91.8%,堆密度可達0.82 g/cm~3。
[Abstract]:Eutectic technology is the leading research direction of high value-added industries, such as fine chemicals and pharmaceuticals. In this paper, a solid mixture of erythritol and trichlorosucrose was prepared by melt eutectic method with erythritol as the carrier. The structure and properties were characterized by TG-DSC-XRD and SEM. The results showed that the solid mixture of erythritol and sucralose was eutectic. The peak temperature of the endothermic peak of DSC and sucrose trichlorohydrin is 156.2 鈩，

本文編號：1588084