本文關鍵詞： 釩鋁合金 一步法 投料模式 原料品位　出處：《鈦工業進展》2017年05期 　論文類型：期刊論文

【摘要】：為提高一步法生產釩鋁合金的回收率,研究了投料方式、雜質種類及含量、原料品位等對鋁熱反應過程及產品化學成分和回收率的影響。結果表明,投料時采用先密實處理再投料的模式,能夠使反應原料之間緊密接觸,密實程度均勻,產品損耗少;采用Fe、Si含量低的原料,能夠減少噴濺現象,降低產品損耗;采用品位高的V2O5,能夠加快反應速度,防止發生噴濺,且產品的雜質元素含量較低。
[Abstract]:In order to improve the recovery rate of vanadium aluminum alloy produced by one-step method, the effects of feeding mode, impurity type and content, raw material grade on the process of thermo reaction, chemical composition and recovery rate of the product were studied. The mode of first compacting treatment and then feeding can make the reaction material contact closely, the compactness degree is even, and the product loss is less. The use of low Fesi Si content of raw materials can reduce the spatter phenomenon and reduce the loss of products. High grade V _ 2O _ 5 can accelerate the reaction speed, prevent spatter, and the content of impurity elements in the product is low.
【作者單位】： 寶鈦特種金屬有限公司;
【分類號】：TF841.3
【正文快照】： 0引言鈦及鈦合金因密度小、耐腐蝕、比強度高,廣泛應用于航空航天、能源、化工、體育、醫療等領域[1]。釩鋁中間合金是生產鈦合金的重要添加劑,常用的釩鋁合金有Al V55、Al V65、Al V85。Al V55作為Ti-6Al-4V合金的主要添加劑,其生產方法主要有一步法(鋁熱法)和兩步法(鋁熱法+，

本文編號：1454845