【摘要】：針對傳統溫度檢測系統向用戶終端傳輸數據時,存在布線復雜、傳輸距離有限的問題,設計了合適的高精度無線通信溫度檢測系統。利用鉑電阻敏感溫度變化,通過測溫電橋和高質量運放保證溫度數據采集的精確度,使用K60單片機完成數據轉換和濾波,WiFi模塊通過TCP/IP協議將溫度數據發送給計算機終端,在WiFi模塊信號無法覆蓋的地方,可以使用短信查詢的方式通過GSM模塊隨時傳輸溫度數據。實驗結果表明:系統測溫精度能夠達到0.015℃,同時能夠有效實現溫度數據的無線傳輸。
[Abstract]:In order to solve the problem of complex wiring and limited transmission distance between traditional temperature detection system and user terminal, a suitable high precision wireless communication temperature detection system is designed. Using platinum resistance to sensitive temperature change, the accuracy of temperature data acquisition is ensured by temperature measuring bridge and high quality operation amplifier, data conversion and filtering are completed by K60 single chip computer, and WiFi module sends temperature data to computer terminal through TCP/IP protocol. In the place where the signal of WiFi module can not be covered, the temperature data can be transmitted through the GSM module by the way of short message query. The experimental results show that the temperature measurement accuracy of the system can reach 0.015 鈩，

本文編號：2411151