多總線數據記錄與回放系統研究與設計
[Abstract]:With the rapid development of electronic technology and the continuous expansion of bus technology, the bus in embedded system presents the characteristics of increasing types, increasing transmission speed, increasing data volume, etc. And it is becoming more and more common that multiple types of buses work together in the same system. The complexity of the system is becoming more and more high, which makes the recording and analysis of bus data become an essential step in system research and development. It is of great significance for system debugging, fault diagnosis, fault location and shortening maintenance time to record and analyze the system bus data. The complexity of bus data, coupled with the uncertainty of the system running fault, reduces the frequency of the same fault in the system. If these faults recur, it may take a long time, which is bound to increase the time of troubleshooting. If the node with fault is replaced by data recorder, the recorded data can be played back into the system, the probability of the same fault can be increased, the fault can be located quickly, and the development period of the system can be shortened. Therefore, to resolve the playback of recorded data is also a key technology of bus data recording system. Aiming at the recording and playback of bus data, a multi-processor data recording and playback system for parallel acquisition and storage of multi-bus data is designed in this paper. The system supports RS485 bus, CAN bus and Ethernet bus recording or combination recording separately. The problem of losing frames caused by the slow speed of the current bus data recording system is solved, especially for the multi-bus data recording, and the overall speed of the data recording system is improved. The design scheme of multi-bus data recording and playback system presented in this paper has the characteristics of simple capacity expansion, low cost, short development period and high reliability. It provides a new way for data recording in multi-bus system.
【學位授予單位】:南京理工大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:TP274;TP273;TP311.52
【參考文獻】
相關期刊論文 前10條
1 沈臻懿;;黑匣子:飛行事故的“見證者”[J];檢察風云;2015年06期
2 田玉周;楚建安;;基于STM32的以太網數據采集系統設計[J];微處理機;2015年01期
3 朱則剛;;汽車智能黑匣子安全護航防患于未然[J];交通與運輸;2014年04期
4 盧艷軍;牛闖;張曉東;;新型通用飛機機載數據記錄儀的研究[J];沈陽航空航天大學學報;2014年01期
5 蔣韜;劉文波;;基于μC/OS-Ⅱ的便攜式飛行參數數據卸載器[J];電子科技;2012年06期
6 楊勇;高金耀;楊春國;沈中延;周志遠;孫運凡;;基于GIS的海洋地震數據管理系統的設計與實現[J];海洋通報;2011年04期
7 張玉新;;一種新型數據記錄儀的設計[J];飛行器測控學報;2011年03期
8 LU ChihYuan;LUE HangTing;;State-of-the-art flash memory devices and post-flash emerging memories[J];Science China(Information Sciences);2011年05期
9 劉光輝;周軍;于曉洲;;低成本無人飛行器機載數據記錄儀的設計與實現[J];測控技術;2011年01期
10 金偉;成龍;柴波;;數據記錄儀的數據可靠存取技術[J];科學技術與工程;2011年02期
,本文編號:2374031
本文鏈接:http://sikaile.net/kejilunwen/zidonghuakongzhilunwen/2374031.html